SN65C3232 Description
The SN65C3232 and SN75C3232 consist of two line drivers, two line receivers, and a dual chargepump circuit with ±15-kV ESD protection pin-to-pin (serial-port connection pins, including GND). These devices provide the electrical interface between an asynchronous munication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply.
SN65C3232 Key Features
- Operate with 3-V to 5.5-V VCC supply
- Operate up to 1 Mbit/s
- Low supply current: 300 μA typical
- External capacitors: 4 × 0.1 μF
- Accept 5-V logic input with 3.3-V supply
- RS-232 bus-pin ESD protection exceeds