SN65HVD07 Description
They are designed for balanced data transmission and interoperate with ANSI TIA/EIA-485-A and ISO 8482E standardpliant devices. The driver is designed to provide a differential output voltage greater than that required by these standards for increased noise margin. The drivers and receivers have active-high and activelow enables respectively, which can be externally connected together to function as direction...
SN65HVD07 Key Features
- Minimum differential output voltage of 2.5 V Into a 54-Ω load
- Open-circuit, short-circuit, and idle-bus failsafe receiver
- 1/8th Unit-load option available (Up to 256 nodes on the bus)
- Bus-pin ESD protection exceeds 16 kV HBM
- Driver output slew rate control options
- Electrically patible with ANSI TIA/EIA-485-A
- Low-current standby mode: 1 µA typical
- Glitch-free power-up and power-down
SN65HVD07 Applications
- Pin patible with industry standard SN75176