SN65HVD267 Datasheet | Texas Instruments

Features - 1 Meets the Requirements of ISO11898-2 - Turbo CAN: - Specified for 2-Mbps CAN FD (CAN with Flexible Data Rate) - Short and Symmetrical Propagation Delay Times and Fast Loop Times for Enhanced Timing Margin - Higher Data Rates in CAN Networks - I/O Voltage Range Supports 3.3-V and 5-V MCUs - Ideal Passive Behavior When Unpowered - Bus and Logic Terminals are High Impedance (no load) - Power-Up/Down With Glitch Free Operation On Bus - Protection Features - HBM ESD Protection Exceeds ±12 k V - Bus Fault Protection - 27 V to 40 V - Undervoltage Protection on Supply Terminals - Driver Dominant Time Out (TXD DTO) - SN65HVD267: Receiver Dominant Time Out (RXD DTO) - SN65HVD267: FAULT Output Terminal - Thermal Shutdown Protection - Characterized for - 40°C to 125°C Operation 2 Applications - 2-Mbps Operation in CAN with Flexible Data Rate Networks - 1-Mbps Operation in Highly Loaded CAN Networks Down to 10-kbps Networks Using TXD DTO - Industrial Automation, Control, Sensors and Drive Systems - Building, Security and Climate Control Automation - Tele Base Station Status and Control - SN65HVD267: Functional Safety With Redundant and Multi-topology CAN networks - CAN Bus Standards Such as CANopen, Device Net, NMEA2000, ARNIC825, ISO11783, CANaerospace 3 Description This CAN transceiver meets the ISO1189-2 High Speed CAN (Controller Area Network) physical layer standard. It is designed for data rates in excess of 2 Mpbs (megabits per second) for CAN FD (CAN with flexible data rate), greater than 1 Mbps for CAN in short networks, and enhanced timing margin and higher data rates in long and highly-loaded networks. The device provides many protection features to enhance device and CAN-network robustness. The SN65HVD267 adds additional features , allowing easy design of redundant and multi-topology networks with fault indication for higher levels of safety in the CAN system. Device Information (1) PART NUMBER PACKAGE BODY SIZE SN65HVD26x D SOIC (8) 4.90 mm × 3.91...