• Part: SN65LVPE512
  • Description: SN65LVPE512 Dual-Channel USB3.0 Redriver/Equalizer
  • Manufacturer: Texas Instruments
  • Size: 9.01 MB
SN65LVPE512 Datasheet (PDF) Download
Texas Instruments
SN65LVPE512

Description

The SN65LVPE512 device is a dual-channel, singlelane USB 3.0 redriver and signal conditioner supporting data rates of 5 Gbps. The device plies with USB 3.0 spec revision 1.0, supporting electrical idle condition and low frequency periodic signals (LFPS) for USB 3.0 power management modes.

Key Features

  • 1 Single Lane USB 3.0 Equalizer, Redriver
  • Selectable Equalization, De-Emphasis and Output Swing Control
  • Integrated Termination
  • Hot-Plug Capable
  • Low Active Power (U0 state) – 315 mW (Typical), VCC = 3.3 V
  • USB 3.0 Low Power Support – 7 mW (Typical) When No Connection Detected – 70 mW (Typical) When Link in U2, U3 Mode
  • Excellent Jitter and Loss pensation Capability: – > 40 Inches of Total 4-Mil Stripline on FR4
  • Small Foot Print: 3 mm × 3 mm and 4 mm × 4 mm 24-pin QFN Packages
  • High Protection Against ESD Transient – HBM: 5,000 V – CDM: 1,500 V – MM: 200 V