Datasheet4U Logo Datasheet4U.com

SN74AUP2G17 - LOW-POWER DUAL SCHMITT-TRIGGER BUFFER

Description

applications.

Features

  • 1.
  • Available in the Texas Instruments NanoStar™ Package.
  • Low Static-Power Consumption (ICC = 0.9 mA Maximum).
  • Low Dynamic-Power Consumption (Cpd = 4.3 pF Typical at 3.3 V).
  • Low Input Capacitance (Ci = 1.5 pF Typical).
  • Low Noise.
  • Overshoot and Undershoot.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN74101 AND-OR Gate ETC
SN74102 AND Gate ETC
SN74103 Dual J-K Flip-Flop ETC
SN74106 Dual J-K Flip-Flop ETC
SN74108 Dual J-K Flip Flop ETC

Other Datasheets by Texas Instruments

Part Number Description
SN74AUP2G125 LOW-POWER DUAL BUS BUFFER GATE
SN74AUP2G126 LOW-POWER DUAL BUS BUFFER GATE
SN74AUP2G14 LOW-POWER DUAL SCHMITT-TRIGGER INVERTER
SN74AUP2G00 LOW-POWER DUAL 2-INPUT POSITIVE-NAND GATE
SN74AUP2G00-Q1 LOW-POWER DUAL 2-INPUT POSITIVE-NAND GATE

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SN74AUP2G17 www.ti.com SCES750A – SEPTEMBER 2009 – REVISED MAY 2010 LOW-POWER DUAL SCHMITT-TRIGGER BUFFER Check for Samples: SN74AUP2G17 FEATURES 1 • Available in the Texas Instruments NanoStar™ Package • Low Static-Power Consumption (ICC = 0.9 mA Maximum) • Low Dynamic-Power Consumption (Cpd = 4.3 pF Typical at 3.3 V) • Low Input Capacitance (Ci = 1.5 pF Typical) • Low Noise – Overshoot and Undershoot <10% of VCC • Ioff Supports Partial-Power-Down Mode Operation • Wide Operating VCC Range of 0.8 V to 3.6 V • Optimized for 3.3-V Operation • 3.6-V I/O Tolerant to Support Mixed-Mode Signal Operation • tpd = 5.1 ns Maximum at 3.
Published: |