Datasheet4U Logo Datasheet4U.com

SN74AVC1T45 Datasheet Single-bit Dual-supply Bus Transceiver

Manufacturer: Texas Instruments

Overview: SN74AVC1T45 SCES530K – DECEMBER 2003 – REVISED FEBRUARY 2025 SN74AVC1T45 Single-Bit Dual-Supply Bus Transceiver With Configurable Voltage Translation and 3-State Outputs.

General Description

This single-bit noninverting bus transceiver uses two separate configurable power-supply rails.

The SN74AVC1T45 is operational with VCCA/VCCB as low as 1.2V.

The A port is designed to track VCCA.

Key Features

  • Available in the Texas Instruments NanoFree™ package.
  • Fully configurable dual-rail design allows each port to operate over the full 1.2V to 3.6V power-supply range.
  • VCC isolation feature.
  • if either VCC input is at GND, then both ports are in the high-impedance state.
  • DIR input circuit referenced to VCCA.
  • ±12mA output drive at 3.3V.
  • I/Os are 4.6V tolerant.
  • Ioff supports partial-power-down mode operation.
  • Typical max.

SN74AVC1T45 Distributor & Price

Compare SN74AVC1T45 distributor prices and check real-time stock availability from major suppliers. Prices and inventory may vary by region and order quantity.

More Datasheets from Texas Instruments

Part Number Description
SN74AVC16244 16-BIT BUFFER/DRIVER
SN74AVC16245 16-BIT BUS TRANSCEIVER
SN74AVC16334 16-BIT UNIVERSAL BUS DRIVER
SN74AVC16373 16-BIT TRANSPARENT D-TYPE LATCH
SN74AVC16374 16-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOP
SN74AVC16646 16-BIT BUS TRANSCEIVER/REGISTER
SN74AVC16722 22-BIT FLIP-FLOP
SN74AVC16827 20-BIT BUFFER/DRIVER
SN74AVC16834 18-BIT UNIVERSAL BUS DRIVER
SN74AVC16835 18-BIT UNIVERSAL BUS DRIVER