Datasheet4U Logo Datasheet4U.com

SN74HC153 Datasheet Dual 4-line To 1-line Data Selectors/multiplexers

Manufacturer: Texas Instruments

Overview: SN54HC153, SN74HC153 SCLS112E – DECEMBER 1982 – REVISED FEBRUARY 2022 SNx4HC153 Dual 4-Line To 1-Line Data Selectors/Multiplexers.

General Description

The SNx4HC153 is a dual data selector/multiplexer containing full binary decoding to select one of four data sources.

Both channels are controlled by the same address select inputs, and each channel includes its own strobe (G) input.

A high level at the strobe terminal forces the repective output low.

Key Features

  • Wide operating voltage range of 2 V to 6 V.
  • Outputs can drive up to 15 LSTTL loads.
  • Low power consumption, 80-μA max ICC.
  • Typical tpd = 9 ns.
  • ±6-mA output drive at 5 V.
  • Low input current of 1 μA max.
  • Permit multiplexing from n lines to one line.
  • Perform parallel-to-serial conversion.
  • Strobe (enable) line provided for cascading (N lines to n lines) 2.

SN74HC153 Distributor

More Datasheets from Texas Instruments

Part Number Description
SN74HC153D Dual 4-Line To 1-Line Data Selectors/Multiplexers
SN74HC153N Dual 4-Line To 1-Line Data Selectors/Multiplexers
SN74HC151 8-Line To 1-Line Data Selectors/Multiplexers
SN74HC151-Q1 8-LINE TO 1-LINE DATA SELECTOR/MULTIPLEXER
SN74HC151D 8-Line To 1-Line Data Selectors/Multiplexers
SN74HC151N 8-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS
SN74HC157 Quadruple 2-Line to 1-Line Data Selectors/Multiplexers
SN74HC157D Quadruple 2-Line to 1-Line Data Selectors/Multiplexers
SN74HC157N Quadruple 2-Line to 1-Line Data Selectors/Multiplexers
SN74HC158 QUADRUPLE 2-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS