SN74HC153N Datasheet | Texas Instruments

Features - Wide operating voltage range of 2 V to 6 V - Outputs can drive up to 15 LSTTL loads - Low power consumption, 80-μA max ICC - Typical tpd = 9 ns - ±6-m A output drive at 5 V - Low input current of 1 μA max - Permit multiplexing from n lines to one line - Perform parallel-to-serial conversion - Strobe (enable) line provided for cascading (N lines to n lines) 2 Description The SNx4HC153 is a dual data selector/multiplexer containing full binary decoding to select one of four data sources. Both channels are controlled by the same address select inputs, and each channel includes its own strobe (G) input. A high level at the strobe terminal forces the repective output low. PART NUMBER SN74HC153D SN74HC153N SN74HC153NS SN74HC153PW SN54HC153J SNJ54HC153FK Device Information PACKAGE(1) BODY SIZE (NOM) SOIC (16) 9.90 mm × 3.90 mm PDIP (16) 19.31 mm × 6.35 mm SO (16) 6.20 mm × 5.30 mm TSSOP (16) 5.00 mm × 4.40 mm CDIP (16) 24.38 mm × 6.92 mm LCCC (20) 8.89 mm × 8.45 mm (1) For all available packages, see the orderable addendum at the end of the data sheet. Pin numbers are for the D, J, N, NS, PW, and W packages. Functional Block Diagram An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectual property matters and other important disclaimers. PRODUCTION DATA. SN54HC153, SN74HC153 SCLS112E - DECEMBER 1982 - REVISED FEBRUARY 2022 .ti. Table of Contents 1 Features 1 2 Description 1 3 Revision History 2 4 Pin Configuration and Functions 3 5 Specifications 4 5.1 Absolute Maximum Ratings 4 5.2 Remended Operating Conditions(1)...