SN74HC164 - 8-Bit Parallel-Out Serial Shift Registers

Texas Instruments

Datasheet Details

Part number	SN74HC164
Manufacturer	Texas Instruments
File Size	1.27 MB
Description	8-Bit Parallel-Out Serial Shift Registers
Datasheet	SN74HC164-etcTI.pdf

These 8-bit shift registers feature AND-gated serial inputs and an asynchronous clear (CLR) input.

1 Wide Operating Voltage Range of 2 V to 6 V.
Outputs Can Drive Up to 10 LSTTL Loads.
Low Power Consumption, 80-μA Maximum ICC.
Typical tpd = 20 ns.
±4-mA Output Drive at 5 V.
Low Input Current of 1-μA Maximum.
AND-Gated (Enable/Disable) Serial Inputs.
Fully Buffered Clock and Serial Inputs.
Direct Clear.
On Products Compliant to MIL-PRF-38535, All Parameters Are Tested Unless Otherwise Noted. On All Other.

📁 SN74HC164 Similar Datasheet

SN74HC182 - FUNCTION LOOK AHEAD CARRY GENERATOR (ST Microelectronics)
SN74HC06 - Hex Inverter (Lingxing Microelectronics)
SN74HC423 - DUAL RETRIGGERABLE MONOSTABLE MULTIVIBRATOR (ST Microelectronics)
SN74HCT06 - Hex Inverter (Lingxing Microelectronics)
SN74H74N - Dual D-Type Flip-Flop (ETC)
SN74HSTL16918 - 9-Bit To 18-Bit HSTL-To-LVTTL Memory Address Latch (Rev. C) (ETCTI)
SN74101 - AND-OR Gate (ETC)
SN74102 - AND Gate (ETC)

Other Datasheets by Texas Instruments

Published: Sep 16, 2019 |