SN74HC165 - 8-Bit Parallel-Load Shift Registers

Product Overview

Texas Instruments

Datasheet Details

Part number	SN74HC165
Manufacturer	Texas Instruments
File Size	1.25 MB
Description	8-Bit Parallel-Load Shift Registers
Datasheet	SN74HC165 Datasheet
Additional preview pages of the SN74HC165 datasheet.

Product details

Description

The SNx4HC165 devices are 8-bit parallel-load shift registers that, when clocked, shift the data toward a serial (QH) output. H) inputs that are enabled by a low level at the shift/load (SH/LD) input.

Features

1 Wide Operating Voltage Range of 2 V to 6 V.
Outputs Can Drive Up to 10 LSTTL Loads.
Low Power Consumption, 80-µA Maximum ICC.
Typical tpd = 13 ns.
±4-mA Output Drive at 5 V.
Low Input Current of 1 µA Maximum.
Complementary Outputs.
Direct Overriding Load (Data) Inputs.
Gated Clock Inputs.
Parallel-to-Serial Data Conversion.
On Products Compliant to MIL-PRF-38535, All Parameters Are Tested Unless.

📁 Similar Datasheet

SN74HC182 - FUNCTION LOOK AHEAD CARRY GENERATOR (ST Microelectronics)
SN74HC06 - Hex Inverter (Lingxing Microelectronics)
SN74HC423 - DUAL RETRIGGERABLE MONOSTABLE MULTIVIBRATOR (ST Microelectronics)
SN74HCT06 - Hex Inverter (Lingxing Microelectronics)
SN74H74N - Dual D-Type Flip-Flop (ETC)
SN74HSTL16918 - 9-Bit To 18-Bit HSTL-To-LVTTL Memory Address Latch (Rev. C) (ETCTI)
SN74101 - AND-OR Gate (ETC)
SN74102 - AND Gate (ETC)

Other Datasheets by Texas Instruments

SN74HC165-EP - 8-Bit Parallel-Load Shift Registers
SN74HC165-Q1 - 8-Bit Parallel-Load Shift Registers
SN74HC165D - 8-Bit Parallel-Load Shift Registers
SN74HC165N - 8-Bit Parallel-Load Shift Registers
SN74HC161 - 4-BIT SYNCHRONOUS BINARY COUNTERS
SN74HC163-Q1 - 4-Bit Synchronous Binary Counter

Published: Oct 7, 2019 |