Datasheet4U Logo Datasheet4U.com

SN74HC595 - 8-Bit Shift Registers

Description

The SNx4HC595 devices contain an 8-bit, serial-in, parallel-out shift register that feeds an 8-bit D-type storage register.

The storage register has parallel 3state outputs.

Separate clocks are provided for both the shift and storage register.

Features

  • 8-bit serial-in, parallel-out shift.
  • Wide operating voltage range of 2 V to 6 V.
  • High-current 3-state outputs can drive up to 15 LSTTL loads.
  • Low power consumption: 80-μA (maximum) ICC.
  • tpd = 13 ns (typical).
  • ±6-mA output drive at 5 V.
  • Low input current: 1 μA (maximum).
  • Shift register has direct clear.
  • On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, p.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN74HC06 Hex Inverter Lingxing Microelectronics
SN74HC182 FUNCTION LOOK AHEAD CARRY GENERATOR ST Microelectronics
SN74HC423 DUAL RETRIGGERABLE MONOSTABLE MULTIVIBRATOR ST Microelectronics
SN74HCT06 Hex Inverter Lingxing Microelectronics
SN74H74N Dual D-Type Flip-Flop ETC

Other Datasheets by Texas Instruments

Part Number Description
SN74HC595-EP 8-Bit Shift Register
SN74HC595B 8-Bit Shift Register
SN74HC595D 8-Bit Shift Registers
SN74HC595N 8-Bit Shift Registers
SN74HC590A 8-BIT BINARY COUNTER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SN54HC595, SN74HC595 SCLS041J – DECEMBER 1982 – REVISED OCTOBER 2021 SNx4HC595 8-Bit Shift Registers With 3-State Output Registers 1 Features • 8-bit serial-in, parallel-out shift • Wide operating voltage range of 2 V to 6 V • High-current 3-state outputs can drive up to 15 LSTTL loads • Low power consumption: 80-μA (maximum) ICC • tpd = 13 ns (typical) • ±6-mA output drive at 5 V • Low input current: 1 μA (maximum) • Shift register has direct clear • On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters.
Published: |