Datasheet4U Logo Datasheet4U.com

SN74HC74-EP - DUAL D-TYPE POSITIVE EDGE TRIGGERED FLIP-FLOP

Description

The SN74HC74 device contains two independent D-type positive edge triggered flip-flops.

A low level at the preset (PRE) or clear (CLR) inputs sets or resets the outputs, regardless of the levels of the other inputs.

Features

  • 1.
  • Controlled Baseline.
  • One Assembly Site.
  • One Test Site.
  • One Fabrication Site.
  • Extended Temperature Performance of.
  • 55°C to 125°C.
  • Enhanced Diminishing Manufacturing Sources (DMS) Support.
  • Enhanced Product-Change Notification.
  • Qualification Pedigree (1) (1) Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is no.

📥 Download Datasheet

📁 Similar Datasheet

  • SN74HC06 - Hex Inverter (Lingxing Microelectronics)
  • SN74HC182 - FUNCTION LOOK AHEAD CARRY GENERATOR (ST Microelectronics)
  • SN74HC423 - DUAL RETRIGGERABLE MONOSTABLE MULTIVIBRATOR (ST Microelectronics)
  • SN74HCT06 - Hex Inverter (Lingxing Microelectronics)
  • SN74H74N - Dual D-Type Flip-Flop (ETC)
  • SN74101 - AND-OR Gate (ETC)
  • SN74102 - AND Gate (ETC)
  • SN74103 - Dual J-K Flip-Flop (ETC)
  • SN74106 - Dual J-K Flip-Flop (ETC)
  • SN74108 - Dual J-K Flip Flop (ETC)
Other Datasheets by Texas Instruments
  • SN74HC74-Q1 - DUAL D-TYPE POSITIVE-EDGE-TRIGGERED FLIP-FLOP
  • SN74HC74 - Dual D-Type Positive-Edge-Triggered Flip-Flops
  • SN74HC74D - Dual D-Type Positive-Edge-Triggered Flip-Flops
  • SN74HC74N - Dual D-Type Positive-Edge-Triggered Flip-Flops
  • SN74HC7001 - Quadruple 2-Input AND Gates
  • SN74HC7002 - Quadruple 2-Input NOR Gates
  • SN74HC7032 - Quadruple 2-Input OR Gates
  • SN74HC00 - Quadruple 2-Input Positive-NAND Gates

Full PDF Text Transcription

Click to expand full text
www.ti.com SN74HC74-EP DUAL D-TYPE POSITIVE EDGE TRIGGERED FLIP-FLOP WITH CLEAR AND PRESET SCLS710 – MARCH 2008 FEATURES 1 • Controlled Baseline – One Assembly Site – One Test Site – One Fabrication Site • Extended Temperature Performance of –55°C to 125°C • Enhanced Diminishing Manufacturing Sources (DMS) Support • Enhanced Product-Change Notification • Qualification Pedigree (1) (1) Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life.
Published: |