SN74HCT240 - OCTAL BUFFERS AND LINE DRIVER

Texas Instruments

SN74HCT240 Datasheet Preview — Preview of SN74HCT240 PDF

Datasheet Details

Part number	SN74HCT240
Manufacturer	Texas Instruments ↗
File Size	1.86 MB
Description	OCTAL BUFFERS AND LINE DRIVER
Datasheet	SN74HCT240-etcTI.pdf

SN74HCT240 Product details

Description

These octal buffers and line drivers are designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters.

Features

Operating voltage range of 4.5 V to 5.5 V.
High-current outputs drive up to 15 LSTTL loads.
Low power consumption, 80-μA max ICC.
Typical tpd = 12 ns.
±6-mA output drive at 5 V.
Low input current of 1 μA max.
Inputs are TTL-voltage compatible.
3-state outputs drive bus lines or buffer memory address registers 2.

📁 SN74HCT240 Similar Datasheet

SN74HCT06 - Hex Inverter (Lingxing Microelectronics)
SN74HC06 - Hex Inverter (Lingxing Microelectronics)
SN74HC182 - FUNCTION LOOK AHEAD CARRY GENERATOR (ST Microelectronics)
SN74HC423 - DUAL RETRIGGERABLE MONOSTABLE MULTIVIBRATOR (ST Microelectronics)
SN74H74N - Dual D-Type Flip-Flop (ETC)
SN74HSTL16918 - 9-Bit To 18-Bit HSTL-To-LVTTL Memory Address Latch (Rev. C) (ETCTI)
SN74101 - AND-OR Gate (ETC)
SN74102 - AND Gate (ETC)

Other Datasheets by Texas Instruments

SN74HCT244 - Octal Buffers and Line Driver
SN74HCT244-EP - OCTAL BUFFER AND LINE DRIVER
SN74HCT244-Q1 - OCTAL BUFFER AND LINE DRIVER
SN74HCT245 - Octal Bus Transceiver
SN74HCT257 - QUADRUPLE 2-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXER
SN74HCT273 - Octal D-Type Flip-Flops

Published: Jul 13, 2020 |