Datasheet Details
| Part number | SN74HCT257 |
|---|---|
| Manufacturer | Texas Instruments |
| File Size | 484.09 KB |
| Description | QUADRUPLE 2-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXER |
| Datasheet |
 SN74HCT257 Datasheet
|
|
|
| Part number | SN74HCT257 |
|---|---|
| Manufacturer | Texas Instruments |
| File Size | 484.09 KB |
| Description | QUADRUPLE 2-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXER |
| Datasheet |
SN74HCT257 Datasheet
|
|
|
|
/ordering information NC − No internal connection The ’HCT257 devices are designed to multiplex signals from 4-bit data sources to 4-output data lines in bus-organized systems.
The 3-state outputs do not load the data lines when the output-enable (OE) input is at the high logic level.
To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor;
SN54HCT257, SN74HCT257 QUADRUPLE 2ĆLINE TO 1ĆLINE DATA SELECTORS/MULTIPLEXERS WITH 3ĆSTATE OUTPUTS SCLS072D − NOVEMBER 1988 − REVISED SEPTEMBER 2003 D Operating Voltage Range of 4.5 V to 5.5 V D High-Current 3-State Outputs Interface Directly With System Bus D Typical tpd = 17 ns D Low Power Consumption, 80-µA Max ICC D ±6-mA Output Drive at 5 V D Low Input Current of 1 µA Max D Inputs Are TTL-Voltage Compatible D Provide Bus Interface From Multiple Sources in High-Performance Systems D Buffered Inputs and Outputs SN54HCT257 .
.
.
| Part Number | Description |
|---|---|
| SN74HCT240 | OCTAL BUFFERS AND LINE DRIVER |
| SN74HCT244 | Octal Buffers and Line Driver |
| SN74HCT244-EP | OCTAL BUFFER AND LINE DRIVER |
| SN74HCT244-Q1 | OCTAL BUFFER AND LINE DRIVER |
| SN74HCT245 | Octal Bus Transceiver |
| SN74HCT273 | Octal D-Type Flip-Flops |
| SN74HCT00 | QUADRUPLE 2-INPUT POSITIVE-NAND GATE |
| SN74HCT00D | QUADRUPLE 2-INPUT POSITIVE-NAND GATE |
| SN74HCT00N | QUADRUPLE 2-INPUT POSITIVE-NAND GATE |
| SN74HCT02 | QUADRUPLE 2-INPUT POSITIVE-NOR GATE |