SN74LV374A-Q1 Datasheet OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP

Manufacturer: Texas Instruments

SN74LV374A-Q1 octal edge-triggered d-type flip-flop by Texas Instruments - Datasheet Preview

Datasheet Details

Part number	SN74LV374A-Q1
Manufacturer	Texas Instruments
File Size	768.44 KB
Description	OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP
Datasheet	SN74LV374A-Q1 Datasheet

General Description

/ordering information The SN74LV374A is an octal edge-triggered D-type flip-flop designed for 2-V to 5.5-V VCC operation.

This device

Overview

SN74LV374A-Q1 OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS SCLS468C − FEBRUARY 2003 − REVISED JANUARY 2008 D Qualified for Automotive Applications D Typical VOLP (Output Ground Bounce) <0.8 V at VCC = 3.3 V, TA = 25°C D Typical VOHV (Output VOH Undershoot) >2.3 V at VCC = 3.

Key Features

3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. It is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. On the positive transition of the clock (CLK) input, the Q outputs are set to the logic levels set up at the data (D) inputs. A buffered output-enable (OE) input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or high-impe.

More Datasheets from Texas Instruments

Part Number	Description
SN74LV374A-EP	Octal Edge-Triggered D-Type Flip-Flop
SN74LV374A	Octal Edge-Triggered D-Type Flip-Flop
SN74LV374AT	OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP
SN74LV373A	Octal Transparent D-Type Latche
SN74LV373A-Q1	Octal Transparent D-Type Latche
SN74LV373AT	Octal Transparent D-Type Latche
SN74LV32A	Quadruple 2-Input Positive-Or Gate
SN74LV32A-EP	Quadruple 2-Input Positive-Or Gate
SN74LV32A-Q1	Quadruple 2-Input Positive-Or Gate
SN74LV367A	HEX BUFFERS AND LINE DRIVER