Datasheet4U Logo Datasheet4U.com

SN74LV541AT - OCTAL BUFFER/DRIVER

General Description

The SN74LV541AT is designed for 4.5-V to 5.5-V VCC operation.

The inputs are TTL-voltage compatible, which allows them to be interfaced with bipolar outputs and 3.3-V devices.

The device also can be used to translate from 3.3 V to 5 V.

Key Features

  • 1.
  • Inputs Are TTL-Voltage Compatible.
  • 4.5-V to 5.5-V VCC Operation.
  • Typical tpd of 4 ns at 5 V.
  • Typical VOLP (Output Ground Bounce) 2.3 V at VCC = 5 V, TA = 25°C.
  • Supports Mixed-Mode Voltage Operation on All Ports.
  • Ioff Supports Partial-Power-Down Mode Operation.
  • Latch-Up Performance Exceeds 250 mA Per JESD 17.
  • ESD Protection Exceeds JESD 22.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN74LVC1G125 high performance non-inverting buffer UMW
SN74LVC1G34 Single buffer UMW
SN74L71 AND-Gate R-S Master-Slave F-F National Semiconductor
SN74L74N Dual D-Type Flip-Flop ETC
SN74LS00 QUAD 2-INPUT NAND GATE Motorola

Other Datasheets by Texas Instruments

Part Number Description
SN74LV541A Octal Buffers/Drivers
SN74LV540A Octal Buffers/Drivers
SN74LV573A Octal Transparent D-Type Latches
SN74LV573AT OCTAL TRANSPARENT D-TYPE LATCH
SN74LV574A OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SN74LV541AT www.ti.com SCES573B – JUNE 2004 – REVISED JULY 2013 OCTAL BUFFER/DRIVER WITH 3-STATE OUTPUTS Check for Samples: SN74LV541AT FEATURES 1 • Inputs Are TTL-Voltage Compatible • 4.5-V to 5.5-V VCC Operation • Typical tpd of 4 ns at 5 V • Typical VOLP (Output Ground Bounce) <0.8 V at VCC = 5 V, TA = 25°C • Typical VOHV (Output VOH Undershoot) >2.3 V at VCC = 5 V, TA = 25°C • Supports Mixed-Mode Voltage Operation on All Ports • Ioff Supports Partial-Power-Down Mode Operation • Latch-Up Performance Exceeds 250 mA Per JESD 17 • ESD Protection Exceeds JESD 22 – 2000-V Human-Body Model (A114-A) – 200-V Machine Model (A115-A) – 1000-V Charged-Device Model (C101) DESCRIPTION The SN74LV541AT is designed for 4.5-V to 5.5-V VCC operation.