SN74LV8151 Datasheet | Texas Instruments

description /ordering information The SN74LV8151 is a 10-bit universal Schmitt-trigger buffer with 3-state outputs, designed for 2-V to 5.5-V VCC operation. The logic control (T/C) pin allows the user to configure Y1 to Y8 as noninverting or inverting outputs. When T/C is high, the Y outputs are noninverted (true logic ), and when T/C is low, the Y outputs are inverted (plementary logic). When output-enable (OE) input is low, the device passes data from Dn to Yn. When OE is high, the Y outputs are in the high-impedance state. The path A to P is a simple Schmitt-trigger buffer, and the path B to N is a simple Schmitt-trigger inverter. This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. ORDERING INFORMATION PACKAGE† ORDERABLE PART NUMBER TOP-SIDE MARKING PDIP - NT Tube SN74LV8151NT SN74LV8151NT - 40°C to 85°C TSSOP - PW Tube SN74LV8151PW Tape and reel SN74LV8151PWR LV8151 † Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at .ti./sc/package. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. - POST OFFICE BOX 655303 DALLAS, TEXAS 75265 Copyright  2004, Texas Instruments Incorporated 1 SN74LV8151 10ĆBIT UNIVERSAL...