Datasheet4U Logo Datasheet4U.com

SN74LV8153 - SERIAL-TO-PARALLEL INTERFACE

General Description

The SN74LV8153 is a serial-to-parallel data converter.

It accepts serial input data and outputs 8-bit parallel data.

The automatic data-rate detection feature of the SN74LV8153 eliminates the need for an external oscillator and helps with cost and board real-estate savings.

Key Features

  • D Single-Wire Serial Data Input D Compatible With UART Serial-Data Format D Up to Eight Devices (64-Bit Parallel) Can Share the Same Bus by Using Different Combinations of A0, A1, A2 D Up to 40 mA Current Drive in Open-Collector Mode for Driving LEDs D Outputs Can be Configured as Open-Collector or Push-Pull D Internal Oscillator and Counter for Automatic Data-Rate Detection D Output Levels Are Referenced to VCC2 and Can Be Configured From 3 V to 12 V D Latch-Up Performance Exceeds 250 mA Per JE.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN74LVC1G125 high performance non-inverting buffer UMW
SN74LVC1G34 Single buffer UMW
SN74L71 AND-Gate R-S Master-Slave F-F National Semiconductor
SN74L74N Dual D-Type Flip-Flop ETC
SN74LS00 QUAD 2-INPUT NAND GATE Motorola

Other Datasheets by Texas Instruments

Part Number Description
SN74LV8153-Q1 SERIAL-TO-PARALLEL INTERFACE
SN74LV8151 10-BIT UNIVERSAL SCHMITT-TRIGGER BUFFER
SN74LV8154 Dual 16-Bit Binary Counters
SN74LV8154-EP Dual 16-Bit Binary Counters
SN74LV86A Quadruple 2-Input Exclusive-OR Gates

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.ti.com SN74LV8153 SERIALĆTOĆPARALLEL INTERFACE SCLS555 − JUNE 2004 DESCRIPTION The SN74LV8153 is a serial-to-parallel data converter. It accepts serial input data and outputs 8-bit parallel data. The automatic data-rate detection feature of the SN74LV8153 eliminates the need for an external oscillator and helps with cost and board real-estate savings. The OUTSEL pin is used to choose between open collector and push-pull outputs. The open-collector option is suitable when this device is used in applications such as LED interface, where high drive current is required. SOUT is the output that acknowledges reception of the serial data.