900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






etcTI

SN74LVC06A-Q1 Datasheet Preview

SN74LVC06A-Q1 Datasheet

HEX INVERTER BUFFERS/DRIVERS

No Preview Available !

SN74LVC06A-Q1
www.ti.com .................................................................................................................................................. SCAS761B – FEBRUARY 2004 – REVISED APRIL 2008
HEX INVERTER BUFFER/DRIVER
WITH OPEN-DRAIN OUTPUTS
FEATURES
1
Qualified for Automotive Applications
Operate From 1.65 V to 3.6 V
Inputs and Open-Drain Outputs Accept
Voltages up to 5.5 V
Max tpd of 3.7 ns at 3.3 V
Ioff Supports Partial-Power-Down Mode
Operation
Latch-Up Performance Exceeds 250 mA Per
JESD 17
D OR PW PACKAGE
(TOP VIEW)
1A 1
1Y 2
2A 3
2Y 4
3A 5
3Y 6
GND 7
14 VCC
13 6A
12 6Y
11 5A
10 5Y
9 4A
8 4Y
DESCRIPTION/ORDERING INFORMATION
This hex inverter buffer/driver is designed for 1.65-V to 3.6-V VCC operation.
The outputs of the SN74LVC06A device are open drain and can be connected to other open-drain outputs to
implement active-low wired-OR or active-high wired-AND functions. The maximum sink current is 24 mA.
Inputs can be driven from either 3.3-V or 5-V devices. This feature allows the use of this device as a translator in
a mixed 3.3-V/5-V system environment.
This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs,
preventing damaging current backflow through the device when it is powered down.
TA
–40°C to 125°C
SOIC – D
TSSOP – PW
ORDERING INFORMATION(1)
PACKAGE (2)
ORDERABLE PART NUMBER
Reel of 2500
SN74LVC06AQDRQ1
Reel of 2000
SN74LVC06AQPWRQ1
TOP-SIDE MARKING
LVC06AQ
LVC06AQ
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
(2) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.
FUNCTION TABLE
(EACH INVERTER)
INPUT
A
H
L
OUTPUT
Y
L
H
LOGIC DIAGRAM, EACH INVERTER (POSITIVE LOGIC)
A
Y
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2004–2008, Texas Instruments Incorporated




etcTI

SN74LVC06A-Q1 Datasheet Preview

SN74LVC06A-Q1 Datasheet

HEX INVERTER BUFFERS/DRIVERS

No Preview Available !

SN74LVC06A-Q1
SCAS761B – FEBRUARY 2004 – REVISED APRIL 2008 .................................................................................................................................................. www.ti.com
Absolute Maximum Ratings(1)
over operating free-air temperature range (unless otherwise noted)
VCC
Supply voltage range
VI
Input voltage range(2)
VO
Output voltage range
IIK
Input clamp current
VI < 0
IOK
Output clamp current
VO < 0
IO
Continuous output current
Continuous current through VCC or GND
θJA
Package thermal impedance (3)
D package
PW package
Tstg
Storage temperature range
MIN
MAX UNIT
–0.5
6.5 V
–0.5
6.5 V
–0.5
6.5 V
–50 mA
–50 mA
±50 mA
±100 mA
86
°C/W
113
–65
150 °C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The input and output negative-voltage ratings may be exceeded if the input and output current ratings are observed.
(3) The package thermal impedance is calculated in accordance with JESD 51-7.
Recommended Operating Conditions(1)
VCC
Supply voltage
VIH
High-level input voltage
VIL
Low-level input voltage
VI
Input voltage
VO
Output voltage
IOL
Low-level output current
TA
Operating free-air temperature
Operating
Data retention only
VCC = 1.65 V to 1.95 V
VCC = 2.3 V to 2.7 V
VCC = 2.7 V to 3.6 V
VCC = 1.65 V to 1.95 V
VCC = 2.3 V to 2.7 V
VCC = 2.7 V to 3.6 V
VCC = 1.65 V
VCC = 2.3 V
VCC = 2.7 V
VCC = 3 V
MIN
MAX
1.65
3.6
1.5
0.65 × VCC
1.7
2
0.35 × VCC
0.7
0.8
0
5.5
0
5.5
4
8
12
24
–40
125
UNIT
V
V
V
V
V
mA
°C
(1) All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
2
Submit Documentation Feedback
Copyright © 2004–2008, Texas Instruments Incorporated
Product Folder Link(s): SN74LVC06A-Q1


Part Number SN74LVC06A-Q1
Description HEX INVERTER BUFFERS/DRIVERS
Maker etcTI
PDF Download

SN74LVC06A-Q1 Datasheet PDF






Similar Datasheet

1 SN74LVC06A-Q1 HEX INVERTER BUFFERS/DRIVERS
etcTI





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy