Datasheet4U Logo Datasheet4U.com

SN74LVCH244A Datasheet OCTAL BUFFERS/DRIVERS

Manufacturer: Texas Instruments

📥 Download Datasheet

General Description

/ORDERING INFORMATION The SN54LVCH244A octal buffer/line driver is designed for 2.7-V to 3.6-V VCC operation, and the SN74LVCH244A octal buffer/line driver is designed for 1.65-V to 3.6-V VCC operation.

These devices are organized as two 4-bit line drivers with separate output-enable (OE) inputs.

When OE is low, these devices pass data from the A inputs to the Y outputs.

Overview

www.ti.com SN54LVCH244A, SN74LVCH244A OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS SCES009O – JULY 1995 – REVISED FEBRUARY.

Key Features

  • Operate From 1.65 V to 3.6 V.
  • Inputs Accept Voltages to 5.5 V.
  • Max tpd of 5.9 ns at 3.3 V.
  • Typical VOLP (Output Ground Bounce) 2 V at VCC = 3.3 V, TA = 25°C.
  • Support Mixed-Mode Signal Operation on All Ports (5-V Input/Output Voltage With 3.3-V VCC).
  • Ioff Supports Partial-Power-Down Mode Operation.
  • Bus Hold on Data Inputs Eliminates the Need for Extern.

More Datasheets from Texas Instruments

Part Number Description
SN74LVCH245A Octal Bus Transceivers
SN74LVCH245A-Q1 OCTAL BUS TRANSCEIVER
SN74LVCH162244A 16-Bit Buffer/Driver
SN74LVCH16240A 16-BIT BUFFER/DRIVER
SN74LVCH16244A 16-Bit Buffer/Driver
SN74LVCH16245A 16-bit Bus Transceiver
SN74LVCH16373A 16-Bit Transparent D-Type Latch
SN74LVCH16374A 16-Bit Edge-Triggered D-Type Flip-Flop
SN74LVCH16540A 16-BIT BUFFER/DRIVER
SN74LVCH16541A 16-BIT BUFFER/DRIVER