Datasheet4U Logo Datasheet4U.com

SN74LVTH273-EP - 3.3-V ABT OCTAL D-TYPE FLIP-FLOPS

General Description

This octal D-type flip-flop is designed specifically for low-voltage (3.3 V) VCC operation, but with the capability to provide a TTL interface to a 5-V system environment.

The SN74LVTH273 is a positive-edge-triggered flip-flop with a direct clear (CLR) input.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN74LVC1G125 high performance non-inverting buffer UMW
SN74LVC1G34 Single buffer UMW
SN74L71 AND-Gate R-S Master-Slave F-F National Semiconductor
SN74L74N Dual D-Type Flip-Flop ETC
SN74LS00 QUAD 2-INPUT NAND GATE Motorola

Other Datasheets by Texas Instruments

Part Number Description
SN74LVTH273 3.3-V ABT OCTAL D-TYPE FLIP-FLOPS
SN74LVTH2245 3.3-V ABT OCTAL BUS TRANSCEIVERS
SN74LVTH240 3.3-V ABT OCTAL BUFFERS/DRIVERS
SN74LVTH241 3.3-V ABT OCTAL BUFFERS/DRIVERS
SN74LVTH244A 3.3-V ABT OCTAL BUFFERS/DRIVERS

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
D Controlled Baseline − One Assembly/Test Site, One Fabrication Site D Enhanced Diminishing Manufacturing Sources (DMS) Support D Enhanced Product-Change Notification D Qualification Pedigree† D Supports Mixed-Mode Signal Operation (5-V Input and Output Voltages With 3.3-V VCC ) D Typical VOLP (Output Ground Bounce) <0.8 V at VCC = 3.3 V, TA = 25°C D Supports Unregulated Battery Operation Down to 2.7 V D Buffered Clock and Direct-Clear Inputs D Individual Data Input to Each Flip-Flop D Ioff Supports Partial Power-Down-Mode Operation † Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range.