Datasheet Details
| Part number | SN74LVTH374-EP |
|---|---|
| Manufacturer | Texas Instruments |
| File Size | 690.05 KB |
| Description | 3.3-V ABT OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP |
| Datasheet |
 SN74LVTH374-EP Datasheet
|
|
|
| Part number | SN74LVTH374-EP |
|---|---|
| Manufacturer | Texas Instruments |
| File Size | 690.05 KB |
| Description | 3.3-V ABT OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP |
| Datasheet |
SN74LVTH374-EP Datasheet
|
|
|
|
/ordering information This octal flip-flop is designed specifically for low-voltage (3.3-V) VCC operation, but with the capability to provide a TTL interface to a 5-V system environment.
The eight flip-flops of the SN74LVTH374 are edge-triggered D-type flip-flops.
On the positive transition of the clock (CLK) input, the Q outputs are set to the logic levels set up at the data (D) inputs.
SN74LVTH374ĆEP 3.3ĆV ABT OCTAL EDGEĆTRIGGERED DĆTYPE FLIPĆFLOP WITH 3ĆSTATE OUTPUTS SCBS771 − NOVEMBER 2003 D Controlled Baseline − One Assembly/Test Site, One Fabrication Site D Enhanced Diminishing Manufacturing Sources (DMS) Support D Enhanced Product-Change Notification D Qualification Pedigree† D Supports Mixed-Mode Signal Operation (5-V Input and Output Voltages With 3.3-V VCC) D Typical VOLP (Output Ground Bounce) <0.8 V at VCC = 3.3 V, TA = 25°C D Supports Unregulated Battery Operation Down to 2.7 V D Ioff and Power-Up 3-State Support Hot Insertion † Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range.
This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life.
Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits.
| Part Number | Description |
|---|---|
| SN74LVTH374 | 3.3-V ABT OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP |
| SN74LVTH373 | 3.3-V ABT OCTAL TRANSPARENT D-TYPE LATCHES |
| SN74LVTH373-EP | 3.3-V ABT OCTAL TRANSPARENT D-TYPE LATCH |
| SN74LVTH322374 | 3.3-V ABT 32-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOP |
| SN74LVTH32244 | 3.3-V ABT 32-BIT BUFFER/DRIVER |
| SN74LVTH32244-EP | 3.3-V ABT 32-BIT BUFFER/DRIVER |
| SN74LVTH32245 | 3.3-V ABT 32-BIT BUS TRANSCEIVER |
| SN74LVTH32373 | 3.3-V ABT 32-BIT TRANSPARENT D-TYPE LATCH |
| SN74LVTH32373-EP | 3.3-V ABT 32-BIT TRANSPARENT D-TYPE LATCH |
| SN74LVTH32374 | 3.3-V ABT 32-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOP |