SN75ALS174A Datasheet | Texas Instruments

Features - 1 Meets or Exceeds the Requirements of ANSI EIA/TIA-422-B and RS-485 - High-Speed Advanced Low-Power Schottky Circuitry - Designed for up to 20-Mbit/s Operation in Both Serial and Parallel Applications - Designed for Multipoint Transmission on Long Bus Lines in Noisy Environments - Low Supply Current Requirements 55 m A Max - Wide Positive and Negative Input/Output Bus Voltage Ranges - Driver Output Capacity: 60 m A - Thermal-Shutdown Protection - Driver Positive- and Negative-Current Limiting - Functionally Interchangeable With SN75174 2 Applications - Motor Drives - Factory Automation and Control 3 Description The SN75ALS174A is a quadruple line driver with tristate differential outputs. It is designed to meet the requirements of ANSI Standards EIA/TIA-422-B and RS-485. This device is optimized for balanced multipoint bus transmission at rates of up to 20 Mbit/s. Spacer Each driver features wide positive and negative mon-mode output voltage ranges that make them suitable for party-line applications in noisy environments. The SN75ALS174A provides positive- and negativecurrent limiting and thermal shutdown for protection from line fault conditions on the transmission bus line. Shutdown occurs at a junction temperature of approximately 150°C. The SN75ALS174A is characterized for operation from 0°C to 70°C. Device Information(1) PART NUMBER PACKAGE BODY SIZE (NOM) PDIP (N) (16) 19.3 mm x 6.50 mm SOIC (DW) (20) 12.8 mm x 7.50 mm TSSOP (PW) (20) 6.50 mm x 4.40 mm (1) For all available packages, see the orderable addendum at the end of the data sheet. INPUT A Function Table (each driver)(1) (2) ENABLES OUTPUTS...