SN75ALS175 - Quadruple Differential Line Receiver

Product Overview

Texas Instruments

Part number	SN75ALS175
Manufacturer	Texas Instruments
File Size	1.11 MB
Description	Quadruple Differential Line Receiver
Datasheet	SN75ALS175 Datasheet
Additional preview pages of the SN75ALS175 datasheet.

The SN75ALS175 is a monolithic quadruple differential line receiver with 3-state outputs.

It is designed to meet the requirements of ANSI Standards EIA/TIA-422-B, EIA/TIA-423-B, and RS-485 and several ITU recommendations.

Meets or exceeds the requirements of ANSI EIA/ TIA-422-B, EIA/TIA-423-B, and RS-485.
Meets ITU recommendations V.10, V.11, X.26, and X.27.
Designed for multipoint bus transmission on long bus lines in noisy environments.
Low supply current requirement 27 mA maximum.
Common-mode input voltage range of.
12 V to 12 V.
Input sensitivity: ±200 mV.
Input hysteresis: 50 mV typical.
High input impedance: 12 kΩ minimum.

SN7500 - Pulse Width Modulation (KODENSHI)
SN7500P - Pulse Width Modulation (KODENSHI)
SN75173 - Quad EIA-485 Line Receivers (Motorola)
SN75175 - QUAD EIA-485 LINE RECEIVER (Motorola)
SN75175 - Quad EIA-485 Line Receivers (Motorola)
SN75175D - QUAD EIA-485 LINE RECEIVER (Motorola)
SN75175N - QUAD EIA-485 LINE RECEIVER (Motorola)
SN75176B - Multipoint RS-485/RS-422 Transceivers (UMW)
SN75451 - (SN75451 - SN75454) Dual Peripheral Drivers (Motorola Semiconductor)
SN75452 - (SN75451 - SN75454) Dual Peripheral Drivers (Motorola Semiconductor)

Other Datasheets by Texas Instruments

Published: Aug 17, 2021 |