SN75C3243 Overview
The SN65C3243 and SN75C3243 consist of three line drivers, five line receivers, and a dual chargepump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). This device provides the electrical interface between an asynchronous munication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply.
SN75C3243 Key Features
- Operates With 3-V to 5.5-V VCC Supply
- Always-Active Noninverting Receiver Output
- Low Standby Current: 1 μA Typical
- External Capacitors: 4 × 0.1 μF
- Accepts 5-V Logic Input With 3.3-V Supply
- Inter-Operable With SN65C3238, SN75C3238
- RS-232 Bus-Pin ESD Protection Exceeds