SN75DP130 Datasheet | Texas Instruments

Features - 1 Supports DP v1.1a and DP v1.2 Signaling Including HBR2 Data Rates to 5.4 Gbps - Supports HDMI 1.4b With TMDS Clock Frequencies up to 340 MHz - Glueless Interface to AMD, Intel, and NVIDIA Graphics Processors - Auto-Configuration Through Link Training - Output Signal Conditioning With Tunable Voltage Swing and Pre-Emphasis Gain - Highly Configurable Input Variable Equalizer - Two Device Options Including a Dual Power Supply Configuration for Lowest Power - 2-k V ESD HBM Protection - Temperature Range: 0°C to 85°C - 48-Pin 7-mm × 7-mm VQFN Package 2 Applications - Notebook PCs - Desktop PCs - PC Docking Stations - PC Standalone Video Cards 3 Description The SN75DP130 device is a single channel Display Port™ (DP) re-driver that regenerates the DP high-speed digital link. The device plies with the VESA Display Port Standard Version 1.2, and supports a 4-lane Main Link interface signaling up to HBR2 rates at 5.4 Gbps per lane. This device also supports DP++ Dual-Mode, offering TMDS signaling for DVI and full HDMI Version 1.4a support. The device pensates for PCB-related frequency loss and switching-related loss to provide the optimum DP electrical performance from source to sink. The Main Link signal inputs feature configurable equalizers with selectable boost settings. At the Main Link output, four primary levels of differential output voltage swing (VOD) and four primary levels of preemphasis are available. A secondary level of boost adjustment, programmed through I2C, for fine-tuning the Main Link output. The device can monitor the AUX channel and automatically adjust the output signaling levels and input equalizers in response to Link Training mands. Additionally, the SN75DP130 output signal conditioning and EQ parameters are fully programmable through the I2C interface. Device Information(1) PART NUMBER PACKAGE BODY SIZE (NOM) VQFN (48) 7.00 mm × 7.00 mm (1) For all available packages, see the orderable addendum at the end of the data...