SNJ54BCT541J Datasheet | Texas Instruments

description /ordering information The SN54BCT541 and SN74BCT541A octal buffers and line drivers are ideal for driving bus lines or buffering memory-address registers. The devices feature inputs and outputs on opposite sides of the package to facilitate printed-circuit-board layout. The 3-state control gate is a 2-input AND gate with active-low inputs so that, if either output-enable (OE1 or OE2) input is high, all eight outputs are in the high-impedance state. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. ORDERING INFORMATION PACKAGE† ORDERABLE PART NUMBER TOP-SIDE MARKING PDIP - N Tube SN74BCT541AN SN74BCT541AN 0°C to 70°C SOIC - DW Tube Tape and reel SN74BCT541ADW SN74BCT541ADWR BCT541A - NS Tape and reel SN74BCT541ANSR BCT541A CDIP - J Tube - 55°C to 125°C CFP - W Tube SNJ54BCT541W SNJ54BCT541W LCCC - FK Tube SNJ54BCT541FK SNJ54BCT541FK † Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at .ti./sc/package. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data...