900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






etcTI

SNJ54HC174J Datasheet Preview

SNJ54HC174J Datasheet

HEX D-TYPE FLIP-FLOPS

No Preview Available !

D Wide Operating Voltage Range of 2 V to 6 V
D Outputs Can Drive Up To 10 LSTTL Loads
D Low Power Consumption, 80-µA Max ICC
D Typical tpd = 14 ns
D ±4-mA Output Drive at 5 V
D Low Input Current of 1 µA Max
D Contain Six Flip-Flops With Single-Rail
Outputs
D Applications Include:
− Buffer/Storage Registers
− Shift Registers
− Pattern Generators
description/ordering information
These positive-edge-triggered D-type flip-flops
have a direct clear (CLR) input.
Information at the data (D) inputs meeting the
setup time requirements is transferred to the
outputs on the positive-going edge of the clock
(CLK) pulse. Clock triggering occurs at a
particular voltage level and is not directly related
to the transition time of the positive-going edge of
CLK. When CLK is at either the high or low level,
the D input has no effect at the output.
SN54HC174, SN74HC174
HEX DĆTYPE FLIPĆFLOPS
WITH CLEAR
SCLS119D − DECEMBER 1982 − REVISED SEPTEMBER 2003
SN54HC174 . . . J OR W PACKAGE
SN74HC174 . . . D, DB, N, NS, OR PW PACKAGE
(TOP VIEW)
CLR 1
1Q 2
1D 3
2D 4
2Q 5
3D 6
3Q 7
GND 8
16 VCC
15 6Q
14 6D
13 5D
12 5Q
11 4D
10 4Q
9 CLK
SN54HC174 . . . FK PACKAGE
(TOP VIEW)
3 2 1 20 19
1D 4
18 6D
2D 5
17 5D
NC 6
16 NC
2Q 7
15 5Q
3D 8
14 4D
9 10 11 12 13
NC − No internal connection
ORDERING INFORMATION
TA
PACKAGE†
PACKAGE†
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
PDIP − N
Tube of 25
SN74HC174N
SN74HC174N
Tube of 40
SN74HC174D
SOIC − D
Reel of 2500
Reel of 250
SN74HC174DR
SN74HC174DT
HC174
−40°C to 85°C
SOP − NS
SSOP − DB
Reel of 2000
Reel of 2000
SN74HC174NSR
SN74HC174DBR
HC174
HC174
Tube of 90
SN74HC174PW
TSSOP − PW
Reel of 2000
Reel of 250
SN74HC174PWR
SN74HC174PWT
HC174
CDIP − J
Tube of 25
SNJ54HC174J
SNJ54HC174J
−55°C to 125°C CFP − W
Tube of 150
SNJ54HC174W
SNJ54HC174W
LCCC − FK
Tube of 55
SNJ54HC174FK
SNJ54HC174FK
Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are
available at www.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright 2003, Texas Instruments Incorporated
On products compliant to MILĆPRFĆ38535, all parameters are tested
unless otherwise noted. On all other products, production
processing does not necessarily include testing of all parameters.
1




etcTI

SNJ54HC174J Datasheet Preview

SNJ54HC174J Datasheet

HEX D-TYPE FLIP-FLOPS

No Preview Available !

SN54HC174, SN74HC174
HEX DĆTYPE FLIPĆFLOPS
WITH CLEAR
SCLS119D − DECEMBER 1982 − REVISED SEPTEMBER 2003
FUNCTION TABLE
(each flip-flop)
INPUTS
CLR CLK D
OUTPUT
Q
L
X
X
L
H
H
H
H
L
L
H
L
X
Q0
logic diagram (positive logic)
1
CLR
CLK 9
3
1D
1D
C1
R
2 1Q
To Five Other Channels
Pin numbers shown are for the D, DB, J, N, NS, PW, and W packages.
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 7 V
Input clamp current, IIK (VI < 0 or VI > VCC) (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA
Output clamp current, IOK (VO < 0 or VO > VCC) (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA
Continuous output current, IO (VO = 0 to VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±25 mA
Continuous current through VCC or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±50 mA
Package thermal impedance, θJA (see Note 2): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73°C/W
DB package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82°C/W
N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67°C/W
NS package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64°C/W
PW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108°C/W
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
2. The package thermal impedance is calculated in accordance with JESD 51-7.
2
POST OFFICE BOX 655303 DALLAS, TEXAS 75265


Part Number SNJ54HC174J
Description HEX D-TYPE FLIP-FLOPS
Maker etcTI
PDF Download

SNJ54HC174J Datasheet PDF






Similar Datasheet

1 SNJ54HC174FK HEX D-TYPE FLIP-FLOPS
etcTI
2 SNJ54HC174J HEX D-TYPE FLIP-FLOPS
etcTI
3 SNJ54HC174W HEX D-TYPE FLIP-FLOPS
etcTI





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy