TCAN1043-Q1
Description
The TCAN1043xx-Q1 meets the physical layer requirements of the ISO 11898-2 (2016) High Speed Controller Area Network (CAN) specification providing an interface between the CAN bus and the CAN protocol controller. These devices support both classical CAN and CAN FD up to 2 megabits per second (Mbps).
Key Features
- AEC Q100: Qualified for automotive applications - Temperature Grade 1: -55°C to 125°C, TA - Device HBM classification level: ±16 kV - Device CDM classification level: ±1500 V
- Functional Safety-Capable - Documentation available to aid functional safety system design
- Meets the requirements of the ISO 11898-2 (2016)
- All devices support classic CAN and 2 Mbps CAN FD (flexible data rate) and "G" options support 5 Mbps - Short and symmetrical propagation delays and fast loop times for enhanced timing margin - Higher data rates in loaded CAN networks
- VIO Level shifting supports 2.8 V to 5.5 V
- Operating modes - Normal mode - Standby Mode with INH output and local and remote wake up request - Low power sleep mode with INH output and local and remote wake up request
- Ideal passive behavior when unpowered - Bus and logic terminals are high impedance (no load to operating bus or application) - Hot plug capable: power up/down glitch free operation on bus and RXD output
- Meets or exceeds EMC standard requirements - IEC 62228-3 - 2007 compliant - SAE J2962-2 compliant
- Protection features - IEC ESD protection of bus terminals: ±8 kV - Bus fault protection: ±58 V (non-H variants) and ±70 V (H variants) - Undervoltage protection on supply terminals - Driver dominant time Out (TXD DTO): data rates down to 9.2 kbps - Thermal shutdown protection (TSD)
- Receiver common mode input voltage: ±30 V
