TLC073 Datasheet | Texas Instruments

TLC070, TLC071, TLC072, TLC073, TLC074, TLC075, TLC07x A FAMILY OF WIDE-BANDWIDTH HIGH-OUTPUT-DRIVE SINGLE SUPPLY OPERATIONAL AMPLIFIERS SLOS219F - JUNE 1999 - REVISED DECEMBER 2011 D Wide Bandwidth . . . 10 MHz D High Output Drive - IOH . . . 57 m A at VDD - 1.5 V - IOL . . . 55 m A at 0.5 V D High Slew Rate - SR+ . . . 16 V/μs - SR- . . . 19 V/μs D Wide Supply Range . . . 4.5 V to 16 V D Supply Current . . . 1.9 m A/Channel D Ultralow Power Shutdown Mode IDD . . . 125 μA/Channel D Low Input Noise Voltage . . . 7 n V√Hz D Input Offset Voltage . . . 60 μV D Ultra-Small Packages - 8 or 10 Pin MSOP (TLC070/1/2/3) Operational Amplifier - + description The first members of TI’s new Bi MOS general-purpose operational amplifier family are the TLC07x. The Bi MOS family concept is simple: provide an upgrade path for Bi FET users who are moving away from dual-supply to single-supply systems and demand higher AC and dc performance. With performance rated from 4.5 V to 16 V across mercial (0°C to 70°C) and an extended industrial temperature range (- 40°C to 125°C), Bi MOS suits a wide range of audio, automotive, industrial and instrumentation applications. Familiar Features like offset nulling pins, and new Features like MSOP Power PAD™ packages and shutdown modes, enable higher levels of performance in a variety of applications. Developed in TI’s patented LBC3 Bi CMOS process, the new Bi MOS amplifiers bine a very high input impedance low-noise CMOS front end with a high-drive bipolar output stage, thus providing the optimum performance Features of both. AC performance improvements over the TL07x Bi FET predecessors include a bandwidth of 10 MHz (an increase of 300%) and voltage noise of 7 n V/√Hz (an improvement of 60%). DC improvements include a factor of 4 reduction in input offset voltage down to 1.5 m V (maximum) in the standard grade, and a power supply rejection improvement of greater than 40 d B to 130 d B. Added to this list of impressive Features is the ability to drive...