900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






etcTI

TLC27M2A Datasheet Preview

TLC27M2A Datasheet

Dual Operational Amplifiers

No Preview Available !

TLC27M2, TLC27M2A, TLC27M2B, TLC27M7
LinCMOSPRECISION DUAL OPERATIONAL AMPLIFIERS
D Trimmed Offset Voltage:
TLC27M7 . . . 500 µV Max at 25°C,
VDD = 5 V
D Input Offset Voltage Drift . . . Typically
0.1 µV/Month, Including the First 30 Days
D Wide Range of Supply Voltages Over
Specified Temperature Ranges:
0°C to 70°C . . . 3 V to 16 V
−40°C to 85°C . . . 4 V to 16 V
−55°C to 125°C . . . 4 V to 16 V
D Single-Supply Operation
D Common-Mode Input Voltage Range
Extends Below the Negative Rail (C-Suffix,
I-Suffix Types)
SLOS051E − OCTOBER 1987 − REVISED AUGUST 2008
D Low Noise . . . Typically 32 nV/Hz at
f = 1 kHz
D Low Power . . . Typically 2.1 mW at 25°C,
VDD = 5 V
D Output Voltage Range Includes Negative
Rail
D High Input impedance . . . 1012 Typ
D ESD-Protection Circuitry
D Small-Outline Package Option Also
Available in Tape and Reel
D Designed-In Latch-Up Immunity
D, JG, P OR PW PACKAGE
(TOP VIEW)
1OUT 1
1IN − 2
1IN + 3
GND 4
8 VCC
7 2OUT
6 2IN −
5 2IN +
FK PACKAGE
(TOP VIEW)
NC
1IN −
NC
1IN +
NC
3 2 1 20 19
4
18
5
17
6
16
7
15
8
14
9 10 11 12 13
NC
2OUT
NC
2IN −
NC
DISTRIBUTION OF TLC27M7
INPUT OFFSET VOLTAGE
30
340 Units Tested From 2 Wafer Lots
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ 25
VDD = 5 V
TA = 25°C
P Package
20
15
10
5
NC − No internal connection
0
−800 −400
0
400
800
VIO − Input Offset Voltage − µV
AVAILABLE OPTIONS
PACKAGE
TA
VIOmax
AT 25°C
SMALL OUTLINE CHIP CARRIER
CERAMIC DIP PLASTIC DIP
TSSOP
(D)
(FK)
(JG)
(P)
(PW)
500 µV TLC27M7CD
TLC27M7CP
2 mV TLC27M2BCD
0°C to 70°C
5 mV TLC27M2ACD
TLC27M2BCP
TLC27M2ACP
10 mV TLC27M2CD
TLC27M2CP TLC27M2CPW
500 µV TLC27M7ID
TLC27M7IP
2 mV TLC27M2BID
−40°C to 85°C
5 mV TLC27M2AID
TLC27M2BIP
TLC27M2AIP
10 mV TLC27M2ID
TLC27M2IP
TLC27M2IPW
500 µV TLC27M7MD
TLC27M7MFK TLC27M7MJG TLC27M7MP
−55°C to 125°C
10 mV TLC27M2MD
TLC27M2MFK TLC27M2MJG TLC27M2MP
The D and PW package are available taped and reeled. Add R suffix to the device type (e.g.,TLC27M7CDR). For the most current package and
ordering information, see the Package Option Addendum at the end of this document, or see the TI web site at www.ti.com.
LinCMOS is a trademark of Texas Instruments. All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright 1987 − 2008, Texas Instruments Incorporated
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
1




etcTI

TLC27M2A Datasheet Preview

TLC27M2A Datasheet

Dual Operational Amplifiers

No Preview Available !

TLC27M2, TLC27M2A, TLC27M2B, TLC27M7
LinCMOSPRECISION DUAL OPERATIONAL AMPLIFIERS
SLOS051E − OCTOBER 1987 − REVISED AUGUST 2008
description
The TLC27M2 and TLC27M7 dual operational amplifiers combine a wide range of input offset voltage grades
with low offset voltage drift, high input impedance, low noise, and speeds approaching that of general-purpose
bipolar devices.These devices use Texas Instruments silicon-gate LinCMOS technology, which provides offset
voltage stability far exceeding the stability available with conventional metal-gate processes.
The extremely high input impedance, low bias currents, and high slew rates make these cost-effective devices
ideal for applications which have previously been reserved for general-purpose bipolar products, but with only
a fraction of the power consumption. Four offset voltage grades are available (C-suffix and I-suffix types),
ranging from the low-cost TLC27M2 (10 mV) to the high-precision TLC27M7 (500 µV). These advantages, in
combination with good common-mode rejection and supply voltage rejection, make these devices a good
choice for new state-of-the-art designs as well as for upgrading existing designs.
In general, many features associated with bipolar technology are available on LinCMOS operational amplifiers,
without the power penalties of bipolar technology. General applications such as transducer interfacing, analog
calculations, amplifier blocks, active filters, and signal buffering are easily designed with the TLC27M2 and
TLC27M7. The devices also exhibit low voltage single-supply operation, making them ideally suited for remote
and inaccessible battery-powered applications. The common-mode input voltage range includes the negative
rail.
A wide range of packaging options is available, including small-outline and chip-carrier versions for high-density
system applications.
The device inputs and outputs are designed to withstand −100-mA surge currents without sustaining latch-up.
The TLC27M2 and TLC27M7 incorporate internal ESD-protection circuits that prevent functional failures at
voltages up to 2000 V as tested under MIL-STD-883C, Method 3015.2; however, care should be exercised in
handling these devices as exposure to ESD may result in the degradation of the device parametric performance.
The C-suffix devices are characterized for operation from 0°C to 70°C. The I-suffix devices are characterized
for operation from − 40°C to 85°C. The M-suffix devices are characterized for operation over the full military
temperature range of −55°C to 125°C.
2
POST OFFICE BOX 655303 DALLAS, TEXAS 75265


Part Number TLC27M2A
Description Dual Operational Amplifiers
Maker etcTI
PDF Download

TLC27M2A Datasheet PDF






Similar Datasheet

1 TLC27M2 Dual Operational Amplifiers
etcTI
2 TLC27M2A Dual Operational Amplifiers
etcTI
3 TLC27M2B Dual Operational Amplifiers
etcTI





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy