900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






etcTI

TLC3704M Datasheet Preview

TLC3704M Datasheet

VOLTAGE COMPARATORS

No Preview Available !

TLC3704, TLC3704M
QUAD MICROPOWER LinCMOSVOLTAGE COMPARATORS
D Push-Pull CMOS Output Drives Capacitive
Loads Without Pullup Resistor,
IO = ± 8 mA
D Very Low Power . . . 200 µW Typ at 5 V
D Fast Response Time . . . tPLH = 2.7 µs Typ
With 5-mV Overdrive
D Single Supply Operation . . . 3 V to 16 V
TLC3704M . . . 4 V to 16 V
D On-Chip ESD Protection
description
The TLC3704 consists of four independent
micropower voltage comparators designed to
operate from a single supply and be compatible
with modern HCMOS logic systems. They are
functionally similar to the LM339 but use 1/20th
the power for similar response times. The
push-pull CMOS output stage drives capacitive
loads directly without a power-consuming pullup
resistor to achieve the stated response time.
Eliminating the pullup resistor not only reduces
power dissipation, but also saves board space
and component cost. The output stage is also fully
compatible with TTL requirements.
Texas Instruments LinCMOSprocess offers
superior analog performance to standard CMOS
processes. Along with the standard CMOS
advantages of low power without sacrificing
speed, high input impedance, and low bias
currents, the LinCMOS process offers extremely
stable input offset voltages with large differential
input voltages. This characteristic makes it
possible to build reliable CMOS comparators.
The TLC3704C is characterized for operation
over the commercial temperature range of 0°C to
70°C. The TLC3704I is characterized for
operation over the extended industrial tempera-
ture range of − 40°C to 85°C. The TLC3704M is
characterized for operation over the full military
temperature range of − 55°C to 125°C. The
TLC3704Q is characterized for operation from −
40°C to 125°C.
SLCS117C − NOVEMBER 1986 − REVISED NOVEMBER 2009
D, J, OR N PACKAGE
(TOP VIEW)
1OUT 1
2OUT 2
VDD 3
2IN − 4
2IN + 5
1IN − 6
1IN + 7
14 3OUT
13 4OUT
12 GND
11 4IN +
10 4IN −
9 3IN +
8 3IN −
1OUT
2OUT
VDD
2IN −
2IN +
1IN −
1IN +
PW PACKAGE
(TOP VIEW)
1
14
2
13
3
12
4
11
5
10
6
9
7
8
FK PACKAGE
(TOP VIEW)
3OUT
4OUT
GND
4IN +
4IN −
3IN +
3IN −
VDD
NC
2IN −
NC
2IN +
3 2 1 20 19
4
18
5
17
6
16
7
15
8
14
9 10 11 12 13
GND
NC
4IN +
NC
4IN −
NC − No internal connection
symbol (each comparator)
IN +
IN −
OUT
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
LinCMOS is a trademark of Texas Instruments Incorporated.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright 2009, Texas Instruments Incorporated
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
1




etcTI

TLC3704M Datasheet Preview

TLC3704M Datasheet

VOLTAGE COMPARATORS

No Preview Available !

TLC3704, TLC3704M
QUAD MICROPOWER LinCMOSVOLTAGE COMPARATORS
SLCS117C − NOVEMBER 1986 − REVISED NOVEMBER 2009
AVAILABLE OPTIONS
PACKAGE
TA
VIOmax
at 25°C
SMALL OUTLINE
CERAMIC
CERAMIC DIP PLASTIC DIP
(D)
(FK)
(J)
(N)
0°C to 70°C
5 mV
TLC3704CD
TLC3704CN
−40°C to 85°C
5 mV
TLC3704ID
TLC3704IN
−55°C to 125°C
5 mV
TLC3704MD
TLC3704MFK
TLC3704MJ
−40°C to 125°C
5 mV
TLC3704QJ
The D and PW packages are available taped and reeled. Add R suffix to the device type (e.g., TLC3704CDR).
functional block diagram (each comparator)
VDD
TSSOP
(PW)
TLC3704CPW
TLC3704IPW
IN+
Differential
Input
Circuits
IN−
OUT
GND
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage range, VDD (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.3 V to 18 V
Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 18 V
Input voltage range, VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.3 to VDD
Output voltage range, VO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.3 to VDD
Input current, II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±5 mA
Output current, IO (each output) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA
Total supply current into VDD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 mA
Total current out of GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 mA
Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table
Operating free-air temperature range, TA: TLC3704C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 to 70°C
TLC3704I . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −40°C to 85°C
TLC3704M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −55°C to 125°C
TLC3704Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −40°C to 125°C
Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C
Case temperature for 60 seconds: FK package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: D or N package . . . . . . . . . . . . . . . . 260°C
Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: J package . . . . . . . . . . . . . . . . . . . . . 300°C
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values, except differential voltages, are with respect to network ground.
2. Differential voltages are at IN+ with respect to IN −.
2
POST OFFICE BOX 655303 DALLAS, TEXAS 75265


Part Number TLC3704M
Description VOLTAGE COMPARATORS
Maker etcTI
PDF Download

TLC3704M Datasheet PDF






Similar Datasheet

1 TLC3704 VOLTAGE COMPARATORS
etcTI
2 TLC3704-Q1 VOLTAGE COMPARATORS
etcTI
3 TLC3704M VOLTAGE COMPARATORS
etcTI





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy