Datasheet4U Logo Datasheet4U.com

TLV2352 - DUAL LOW-VOLTAGE DIFFERENTIAL COMPARATORS

General Description

SLCS011B MAY 1992

D High Input Impedance .

.

.

Key Features

  • an extremely high input impedance (typically greater than 1012 Ω), which allows direct interfacing with high-impedance sources. The outputs are N-channel open-drain configurations that require an external pullup resistor to provide a positive output voltage swing, and they can be connected to achieve positive-logic wired-AND relationships. The TLV2352I is fully characterized at 3 V and 5 V for operation from.
  • 40°C to 85°C. The TLV2352M is fully characterized at 3 V and 5 V for operation.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TLV271 Operational Amplifier ON Semiconductor
TLV271 CMOS RAIL TO RAIL OUTPUT OPERATIONAL AMPLIFIERS Diodes
TLV272 Operational Amplifier ON Semiconductor
TLV272 CMOS RAIL TO RAIL OUTPUT OPERATIONAL AMPLIFIERS Diodes
TLV274 Operational Amplifier ON Semiconductor

Other Datasheets by Texas Instruments

Part Number Description
TLV2352IP DUAL LOW-VOLTAGE DIFFERENTIAL COMPARATORS
TLV2352M DUAL LOW-VOLTAGE DIFFERENTIAL COMPARATORS
TLV2352Y DUAL LOW-VOLTAGE DIFFERENTIAL COMPARATORS
TLV2354 QUADRUPLE LOW-VOLTAGE DIFFERENTIAL COMPARATORS
TLV2354IN QUADRUPLE LOW-VOLTAGE DIFFERENTIAL COMPARATORS

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TLV2352, TLV2352Y LinCMOS™ DUAL LOW-VOLTAGE DIFFERENTIAL COMPARATORS D Wide Range of Supply Voltages 2 V to 8 V D Fully Characterized at 3 V and 5 V D Very-Low Supply-Current Drain 120 µA Typ at 3 V D Output Compatible With TTL, MOS, and CMOS D Fast Response Time . . . 200 ns Typ for TTL-Level Input Step description SLCS011B – MAY 1992 – REVISED MARCH 1999 D High Input Impedance . . . 1012 Ω Typ D Extremely Low Input Bias Current 5 pA Typ D Common-Mode Input Voltage Range Includes Ground D Built-In ESD Protection symbol (each comparator) The TLV2352 consists of two independent, IN + low-power comparators specifically designed for OUT single power-supply applications and operates IN – with power-supply rails as low as 2 V.