TLV365 Datasheet | Texas Instruments

Features - Gain bandwidth: 50 MHz - Zerø-crossover distortion topology: - CMRR: 115 d B (typical) - Rail-to-rail input and output - Input 100 m V beyond supply rail - Noise: 4.5 n V/√Hz - Slew rate: 27 V/µs - Fast settling: 0.2 μs to 0.01% - Precision: - Offset drift: 2 μV/°C (maximum) - Input bias current: 20 p A (maximum) - Operating voltage: 2.2-V to 5.5-V 2 Applications - Signal conditioning - Data acquisition - Active filters - Test equipment - Audio - Wideband amplifiers - Rack server 3 Description The TLV365 and TLV2365 devices (TLVx365) are a family of zerø-crossover, rail-to-rail input and output, CMOS operational amplifiers, optimized for low voltage and cost-sensitive applications. Low-noise (4.5 n V/√Hz) and high-speed operation (50-MHz gain bandwidth) make these devices an excellent choice for driving sampling analog-to-digital converters (ADCs) in applications such as low-side current sensing, audio, signal conditioning, and sensor amplification. Special features include an excellent mon-mode rejection ratio (CMRR), no input stage crossover distortion, high input impedance, and rail-to-rail input and output swing. The input mon-mode range includes both the negative and positive supplies. The output voltage swings to within 10 m V of the rails. The TLVx365 are specified for operation from - 40°C to +125°C. Device Information PART NUMBER CHANNEL COUNT PACKAGE(1) Single DBV (SOT-23, 5) TLV2365 Dual D (SOIC, 8) (1) For all available packages, see the orderable addendum at the end of the data sheet. R2 2 kΩ LOAD Short-Circuit -...