TLV9051S Datasheet | Texas Instruments

Features - High slew rate: 15 V/µs - Low quiescent current: 330 µA - Rail-to-rail input and output - Low input offset voltage: ±0.33 m V - Unity-gain bandwidth: 5 MHz - Low broadband noise: 15 n V/√ Hz - Low input bias current: 2 p A - Unity-gain stable - Internal RFI and EMI filter - Scalable family of CMOS op amps for low-cost applications - Operational at supply voltages as low as 1.8 V - Extended temperature range: - 40°C to 125°C 2 Applications - HVAC: heating, ventilating, and air conditioning - Photodiode amplifier - Current shunt monitoring for DC motor control - White goods (refrigerators, washing machines, and so forth) - Sensor signal conditioning - Active filters - Low-side current sensing 3 Description The TLV9051, TLV9052, and TLV9054 devices are single, dual, and quad operational amplifiers, respectively. The devices are designed for low voltage operation from 1.8 V to 6.0 V. The inputs and outputs can operate from rail to rail at a very high slew rate. These devices are an excellent choice for costconstrained applications where low-voltage operation, high slew rate, and low quiescent current is needed. The capacitive-load drive of the TLV905x family is 150 p F, and the resistive open-loop output impedance makes stabilization easier with much higher capacitive loads. The TLV905x S devices include a shutdown mode that allow the amplifiers to be switched off into a standby mode with typical current consumption less than 1 µA. The TLV905x family is easy to use due to the devices being unity-gain stable, including a RFI and EMI filter, and being free from phase reversal in an overdrive condition. Device Information(1) PART NUMBER PACKAGE BODY SIZE (NOM) SOT-23 (5) 1.60 mm × 2.90 mm TLV9051 SC70 (5) SOT553 (5)(2) 1.25 mm × 2.00 mm 1.65 mm × 1.20 mm X2SON (5) 0.80 mm × 0.80 mm SOT-23 (6) 1.60 mm × 2.90 mm SOIC...