TMS320VC5505 Datasheet | Texas Instruments

Features - High-Performance, Low-Power, TMS320C55x™ Fixed-Point Digital Signal Processor - 16.67-, 10-ns Instruction Cycle Time - 60-, 100-MHz Clock Rate - One/Two Instruction(s) Executed per Cycle - Dual Multipliers [Up to 200 Million Multiply-Accumulates per Second (MMACS)] - Two Arithmetic/Logic Units (ALUs) - Three Internal Data/Operand Read Buses and Two Internal Data/Operand Write Buses - Fully Software-patible With C55x Devices - Industrial Temperature Devices Available - 320 K Bytes Zero-Wait State On-Chip RAM, posed of: - 64K Bytes of Dual-Access RAM (DARAM), 8 Blocks of 4K x 16-Bit - 256K Bytes of Single-Access RAM (SARAM), 32 Blocks of 4K x 16-Bit - 128K Bytes of Zero Wait-State On-Chip ROM (4 Blocks of 16K x 16-Bit) - 16-/8-Bit External Memory Interface (EMIF) with Glueless Interface to: - 8-/16-Bit NAND Flash, 1- and 4-Bit ECC - 8-/16-Bit NOR Flash - Asynchronous Static RAM (SRAM) - Direct Memory Access (DMA) Controller - Four DMA With 4 Channels Each (16-Channels Total) - Three 32-Bit General-Purpose Timers - One Selectable as a Watchdog and/or GP - Two Multi Media Card/Secure Digital (MMC/SD) Interfaces - Universal Asynchronous Receiver/Transmitter (UART) - Serial-Port Interface (SPI) With Four Chip-Selects - Master/Slave Inter-Integrated Circuit (I2C Bus™) - Four Inter-IC Sound (I2S Bus™) for Data Transport - Device USB Port With Integrated 2.0 High-Speed PHY that Supports: - USB 2.0 Full- and High-Speed Device - LCD Bridge With Asynchronous Interface - Tightly-Coupled FFT Hardware Accelerator - 10-Bit 4-Input Successive Approximation (SAR) - Real-Time Clock (RTC) With Crystal Input, With Separate Clock Domain, Separate Power Supply - Four Core Isolated Power Supply Domains: Analog, RTC, CPU and Peripherals, and USB - Four I/O Isolated Power Supply Domains: RTC I/O, EMIF I/O, USB PHY, and DVDDIO - Low-Power S/W Programmable Phase-Locked Loop (PLL) Clock...