Texas Instruments TPS2394
The TPS2394 is a hot swap power manager which can provide inrush limit, over current protection, short circuit protection. The TPS2394 operates with supply voltages from −12 V to −80 V, and withstands input transient to −100 V. The TPS2394 uses a power FET to provide load current slew rate control and peak current limiting that is programmed by one resistor and one capacitor.| Part No. | TPS2394 |
|---|---|
| Datasheet | TPS2394 Download |
| Manufacturer |  Texas Instruments |
| Description | -48V Hot Swap Power Manager |
| Buy | Stock & Price |
FEATURES
1● Operating Supply Range of –12 V to –80 V
● Withstands Transients to –100 V
● Programmable Current Limit
● Programmable Linear Inrush Slew Rate
● Programmable UV/OV Thresholds
● Programmable UV and OV Hysteresis
● Fault Timer to Eliminate Nuisance Trips
● Power Good and Fault Outputs
● 14-Pin TSSOP Package
APPLICATIONS
● –48-V Distributed Power Systems● Central Office Switching
● ATCA Systems
● Base Stations
DESCRIPTION
The device also provides a power good output to enable down-stream power converters and a fault output to indicate load problems. TYPICAL APPLICATION DIAGRAM RTN R1 (1) D1 1 Power Good Fault R2 R3 3 UV 12 PG 2 FLT RTN TPS2394 GAT 11 SENSE 10 SOURCE 7 4 OV FLTTIM RAMP NC 5 6 14 CFLT CRAMP NC 9 NC 8 NC 13 -Vin (1) D1 optional per application requirements. RLOAD CLOAD Q1 RSENSE 1 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
