TPS259240 Datasheet | Texas Instruments

Features - 1 VOPERATING = 4.5 V to 13.8 V, VABSMAX = 20 V - Integrated 28-mΩ Pass MOSFET - Fixed 15-V Over Voltage Clamp - 1-A to 5-A Adjustable ILIMIT - ±8% ILIMIT Accuracy at 3.7 A - Reverse Current Blocking Support - Programmable OUT Slew Rate, UVLO - Built-in Thermal Shutdown - UL 2367 Recognized - File No. E339631- - - RILIM ≤ 130 kΩ (5 A maximum) - Safe During Single Point Failure Test (UL60950) - Small Foot Print - 10L (3 mm x 3 mm) VSON 2 Applications - Adapter Powered Devices - HDD and SSD Drives - Set Top Boxes - Servers / AUX Supplies - Fan Control - PCI/PCIe Cards 3 Description The TPS25924x family of e Fuses is a highly integrated circuit protection and power management solution in a tiny package. The devices use few external ponents and provide multiple protection modes. They are a robust defense against overloads, shorts circuits, voltage surges, excessive inrush current, and reverse current. Current limit level can be set with a single external resistor. Over voltage events are limited by internal clamping circuits to a safe fixed maximum, with no external ponents required. Applications with particular voltage ramp requirements can set d V/d T with a single capacitor to ensure proper output ramp rates. Many systems, such as SSDs, must not allow holdup capacitance energy to dump back through the FET body diode onto a drooping or shorted input bus. The BFET pin is for such systems. An external NFET can be connected “Back to Back (B2B)” with the TPS25924x output and the gate driven by BFET to prevent current flow from load to source (see Figure 43). Device Information(1) PART NUMBER PACKAGE BODY SIZE (NOM) TPS259241 TPS259240 VSON (10) 3.00 mm × 3.00 mm (1) For all available packages, see the orderable addendum at the end of the data sheet. Application Schematic Transient: Output Short Circuit VIN R1 R2 Cd Vd...