Datasheet4U Logo Datasheet4U.com

TPS51363 - 8-A or 10-A Converter

General Description

The TPS51363 is a high-voltage input, synchronous converter with integrated FET, based on D-CAP2™ control topology, which enables fast transient response and supports both POSCAP and all MLCC output capacitors.

Key Features

  • 1.
  • 2 Input Voltage Range: 3 V to 22 V.
  • Output Voltage Range: 0.6 V to 2 V.
  • 8-A or 10-A Integrated FET Converter (see Table 1).
  • Fewest External Components.
  • Soft-Start Time Programmable by External Capacitor.
  • Switching Frequency: 400 kHz and 800 kHz.
  • D-CAP2™ Architecture to Enable POSCAP and All MLCC Output Capacitor Usage.
  • Integrated and Temperature Compensated Low-Side On-Resistance Sensing for Accurate OCL Protection.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TPS534 Thermopile Detector PerkinElmer Optoelectronics
TPS535 Thermopile Detector PerkinElmer Optoelectronics
TPS54540D High Efficiency Synchronous Step-down DCDCConverter tokmas
TPS54540DDAR High Efficiency Synchronous Step-down DCDCConverter tokmas
TPS-1 Single Chip Interface Solution Renesas

Other Datasheets by Texas Instruments

Part Number Description
TPS51362 10-A Integrated FET Converter
TPS51367 12-A Integrated FET Converter
TPS5130 Triple Synchronous Buck Controller
TPS5130-Q1 Triple Synchronous Buck Controller
TPS51312 Step-Down Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TPS51363 www.ti.com SLUSBB5A – FEBRUARY 2013 – REVISED JUNE 2013 22-V Input, 8-A or 10-A Converter With Integrated FET Check for Samples: TPS51363 FEATURES 1 •2 Input Voltage Range: 3 V to 22 V • Output Voltage Range: 0.6 V to 2 V • 8-A or 10-A Integrated FET Converter (see Table 1) • Fewest External Components • Soft-Start Time Programmable by External Capacitor • Switching Frequency: 400 kHz and 800 kHz • D-CAP2™ Architecture to Enable POSCAP and All MLCC Output Capacitor Usage • Integrated and Temperature Compensated Low-Side On-Resistance Sensing for Accurate OCL Protection • Powergood Output OCL, OVP, UVP and UVLO Protections • Thermal Shutdown (non-latch) • Output Discharge Function • Integrated Boost MOSFET Switch • 28-Pin, 3.5-mm × 4.5-mm, RVE, QFN Package with 0.