Datasheet4U Logo Datasheet4U.com

TPS51367 - 12-A Integrated FET Converter

General Description

The TPS51367 is a high-voltage input, synchronous converter with integrated FET, based on DCAP-2™ control topology, which enables fast transient response and supports both POSCAP and all MLCC output capacitors.

Key Features

  • 1.
  • 2 Input Voltage Range: 3 V to 22 V.
  • Output Voltage Range: 0.6 V to 2 V.
  • 12-A Integrated FET Converter.
  • Fewest External Components.
  • ULQ™-100 Mode of Operation to Enable Long Battery Life During System Standby.
  • Soft-Start Time Programmable by External Capacitor.
  • Switching Frequency: 400 kHz and 800 kHz.
  • D-CAP2™ Architecture to Enable POSCAP and All MLCC Output Capacitor Usage.
  • Integrated and Temperature Compensated.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TPS534 Thermopile Detector PerkinElmer Optoelectronics
TPS535 Thermopile Detector PerkinElmer Optoelectronics
TPS54540D High Efficiency Synchronous Step-down DCDCConverter tokmas
TPS54540DDAR High Efficiency Synchronous Step-down DCDCConverter tokmas
TPS-1 Single Chip Interface Solution Renesas

Other Datasheets by Texas Instruments

Part Number Description
TPS51362 10-A Integrated FET Converter
TPS51363 8-A or 10-A Converter
TPS5130 Triple Synchronous Buck Controller
TPS5130-Q1 Triple Synchronous Buck Controller
TPS51312 Step-Down Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TPS51367 www.ti.com SLUSBB7A – MARCH 2013 – REVISED JUNE 2013 22-V Input, 12-A Integrated FET Converter With Ultra-Low Quiescent ( ULQ™) Check for Samples: TPS51367 FEATURES 1 •2 Input Voltage Range: 3 V to 22 V • Output Voltage Range: 0.