Datasheet4U Logo Datasheet4U.com

TPS51462 - FETs Converter

General Description

The TPS51462 is a fully integrated synchronous buck regulator employing D-CAP+™.

It is used for up to 5-V step-down where system size is at its premium, performance and optimized BOM are must-haves.

This device fully supports Intel system agent applications with integrated 2-bit VID function.

Key Features

  • 1.
  • 2 Integrated FETs Converter w/TI Proprietary D-CAP+™ Mode Architecture.
  • Minimum External Parts Count.
  • Support all MLCC Output Capacitor and SP/POSCAP.
  • Auto Skip Mode.
  • Selectable 700-kHz and 1-MHz Frequency.
  • Small 4 mm × 4 mm, 24-Pin, QFN Package.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TPS534 Thermopile Detector PerkinElmer Optoelectronics
TPS535 Thermopile Detector PerkinElmer Optoelectronics
TPS54540D High Efficiency Synchronous Step-down DCDCConverter tokmas
TPS54540DDAR High Efficiency Synchronous Step-down DCDCConverter tokmas
TPS-1 Single Chip Interface Solution Renesas

Other Datasheets by Texas Instruments

Part Number Description
TPS51461 FETs Converter
TPS51463 FETs Converter
TPS5140 4-CHANNEL DC/DC CONTROLLER
TPS51427 SYNCHRONOUS STEP-DOWN CONTROLLER
TPS51427A SYNCHRONOUS STEP-DOWN CONTROLLER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TPS51462 www.ti.com SLUSAQ1 – DECEMBER 2011 3.3-V/5-V Input, D-CAP+™ Mode Synchronous Step-Down Integrated FETs Converter With 2-Bit VID Check for Samples: TPS51462 FEATURES 1 •2 Integrated FETs Converter w/TI Proprietary D-CAP+™ Mode Architecture • Minimum External Parts Count • Support all MLCC Output Capacitor and SP/POSCAP • Auto Skip Mode • Selectable 700-kHz and 1-MHz Frequency • Small 4 mm × 4 mm, 24-Pin, QFN Package APPLICATIONS • Low-Voltage Applications Stepping Down from 5-V or 3.3-V Rail • Notebook/Desktop Computers DESCRIPTION The TPS51462 is a fully integrated synchronous buck regulator employing D-CAP+™. It is used for up to 5-V step-down where system size is at its premium, performance and optimized BOM are must-haves.