Datasheet4U Logo Datasheet4U.com

TPS54394 - 3A Dual-Channel Synchronous Step-Down Switcher

General Description

The TPS54394 is a dual, adaptive on-time D-CAP2™ mode synchronous buck converter.

The TPS54394 enables system designers to complete the suite of various end equipment’s power bus regulators with a cost effective, low component count, and low standby current solution.

Key Features

  • 1.
  • 2 D-CAP2™ Control Mode.
  • Fast Transient Response.
  • No External Parts Required For Loop Compensation.
  • Compatible with Ceramic Output Capacitors.
  • Wide Input Voltage Range : 4.5 V to 18 V.
  • Output Voltage Range : 0.76 V to 7 V.
  • Highly Efficient Integrated FETs Optimized for Low Duty Cycle.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TPS54540D High Efficiency Synchronous Step-down DCDCConverter tokmas
TPS54540DDAR High Efficiency Synchronous Step-down DCDCConverter tokmas
TPS534 Thermopile Detector PerkinElmer Optoelectronics
TPS535 Thermopile Detector PerkinElmer Optoelectronics
TPS-1 Single Chip Interface Solution Renesas

Other Datasheets by Texas Instruments

Part Number Description
TPS54395 3A Dual-Channel Synchronous Step-Down Switcher
TPS5430 3-A Wide Input Range Step-Down Converter
TPS5430-EP WIDE-INPUT-RANGE STEP-DOWN CONVERTER
TPS5430-Q1 3-A Wide-Input-Range Step-Down Converter
TPS54302 Synchronous Step-Down Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.ti.com TPS54394 SLVSBE6B – JUNE 2012 – REVISED AUGUST 2013 3A Dual Channel Synchronous Step-Down Switcher with Integrated FET Check for Samples: TPS54394 FEATURES 1 •2 D-CAP2™ Control Mode – Fast Transient Response – No External Parts Required For Loop Compensation – Compatible with Ceramic Output Capacitors • Wide Input Voltage Range : 4.5 V to 18 V • Output Voltage Range : 0.