Datasheet4U Logo Datasheet4U.com

TPS55332-Q1 - Step Up DC/DC Converter

General Description

The TPS55332 is a monolithic high-voltage switching regulator with integrated 3-A, 60-V power MOSFET.

The device can be configured as a switch mode stepup power supply with voltage supervisor.

Key Features

  • 1 Withstands Transients up to 60 V, Boost Input Operating Range of 1.5 V to 40 V (VIN).
  • Peak Internal Switch Current: 5.7 A (typ).
  • 2.5 V ± 1.5% Feedback Voltage Reference.
  • 80 kHz to 2.2 MHz Switching Frequency.
  • High Voltage Tolerant Enable Input for On/Off State.
  • Soft Start on Enable Cycle.
  • Slew Rate Control on Internal Power Switch.
  • External Clock Input for Synchronization.
  • External Compensation for Wide Bandwidth.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TPS534 Thermopile Detector PerkinElmer Optoelectronics
TPS535 Thermopile Detector PerkinElmer Optoelectronics
TPS54540D High Efficiency Synchronous Step-down DCDCConverter tokmas
TPS54540DDAR High Efficiency Synchronous Step-down DCDCConverter tokmas
TPS-1 Single Chip Interface Solution Renesas

Other Datasheets by Texas Instruments

Part Number Description
TPS55330 Boost/SEPIC/Flyback DC-DC Regulator
TPS55340 Boost/SEPIC/Flyback DC/DC Regulator
TPS55340-EP Boost/SEPIC/Flyback DC/DC Regulator
TPS55340-Q1 Boost/SEPIC/Flyback DC/DC Converter
TPS55383 DUAL NON-SYNCHRONOUS CONVERTER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Product Folder Sample & Buy Technical Documents Tools & Software Support & Community TPS55332-Q1 SLVS939B – JUNE 2009 – REVISED DECEMBER 2014 TPS55332-Q1 2.2-MHz, 60-V Output Step Up DC/DC Converter 1 Features •1 Withstands Transients up to 60 V, Boost Input Operating Range of 1.5 V to 40 V (VIN) • Peak Internal Switch Current: 5.7 A (typ) • 2.5 V ± 1.5% Feedback Voltage Reference • 80 kHz to 2.