Datasheet4U Logo Datasheet4U.com

TPS59116 - Memory Power Solution Synchronous Buck Controller

General Description

The TPS59116 provides a complete power supply for DDR/SSTL-2, DDR2/SSTL-18, and DDR3 memory systems.

It integrates a synchronous buck controller with a 3-A sink/source tracking linear regulator and buffered low noise reference.

Key Features

  • 1.
  • 2 Synchronous Buck Controller (VDDQ).
  • Wide-Input Voltage Range: 3.0-V to 28-V.
  • D.
  • CAP™ Mode with 100-ns Load Step Response.
  • Current Mode Option Supports Ceramic Output Capacitors.
  • Supports Soft-Off in S4/S5 States.
  • Current Sensing from RDS(on) or Resistor.
  • 2.5-V (DDR), 1.8-V (DDR2), Adjustable to 1.5-V (DDR3) or Output Range 0.75-V to 3.0-V.
  • Equipped with Power Good, Overvoltage Protection and Undervoltage Protectio.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TPS534 Thermopile Detector PerkinElmer Optoelectronics
TPS535 Thermopile Detector PerkinElmer Optoelectronics
TPS54540D High Efficiency Synchronous Step-down DCDCConverter tokmas
TPS54540DDAR High Efficiency Synchronous Step-down DCDCConverter tokmas
TPS-1 Single Chip Interface Solution Renesas

Other Datasheets by Texas Instruments

Part Number Description
TPS59124 Dual Synchronous Step-Down Controller
TPS5904 OPTOISOLATED FEEDBACK AMPLIFIERS
TPS5904A OPTOISOLATED FEEDBACK AMPLIFIERS
TPS59650 Step-Down Controller
TPS50301-HT 3-A Synchronous Step-Down Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TPS59116 www.ti.com SLUSA57 – NOVEMBER 2010 Complete DDR, DDR2 and DDR3 Memory Power Solution Synchronous Buck Controller, 3-A LDO, Buffered Reference for Embedded Computing Systems Check for Samples: TPS59116 FEATURES 1 •2 Synchronous Buck Controller (VDDQ) – Wide-Input Voltage Range: 3.0-V to 28-V – D−CAP™ Mode with 100-ns Load Step Response – Current Mode Option Supports Ceramic Output Capacitors – Supports Soft-Off in S4/S5 States – Current Sensing from RDS(on) or Resistor – 2.5-V (DDR), 1.8-V (DDR2), Adjustable to 1.5-V (DDR3) or Output Range 0.75-V to 3.