Datasheet4U Logo Datasheet4U.com

TPS60151 - 5-V and 140-mA Charge Pump

General Description

The TPS60151 is a switched capacitor voltage converter which produces a regulated, low noise, and low-ripple output voltage of 5 V from an unregulated input voltage.

It maintains 5-V regulation even when VIN is greater than 5 V.

The 5-V output can supply a minimum of 140-mA current.

Key Features

  • 1 Input Voltage Range 2.7 V to 5.5 V.
  • Fixed Output Voltage of 5 V.
  • Maximum Output Current: 140 mA.
  • 1.5-MHz Switching Frequency.
  • Typical 90-μA Quiescent Current at No Load Condition (Skip Mode).
  • Output Reverse Current Protection.
  • X2 Charge Pump.
  • Hardware Enable and Disable Function.
  • Built-in Soft Start.
  • Built-in Undervoltage Lockout Protection.
  • Thermal and Overcurrent Protection.
  • 2-mm × 2-m.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TPS603A Photo Transistor Toshiba Semiconductor
TPS604 POWER SCHOTTKY RECTIFIER STMicroelectronics
TPS606 TERMINAL OPTO-ELECTRONIC SWITCH Toshiba Semiconductor
TPS60LB SWITCHING MODE 60W LOW COST BOX TYPE POWER SUPPLY Total Power International
TPS611 Phototransistor Toshiba

Other Datasheets by Texas Instruments

Part Number Description
TPS60150 5-V 140-mA Charge-Pump
TPS60100 Regulated 3.3-V 200-mA Low-Noise Charge Pump DC/DC Converter
TPS60101 Regulated 3.3-V High-Power Low-Noise Charge Pump DC/DC Converter
TPS60110 Regulated 5-V 300-mA Low-Noise Charge Pump DC/DC Converter
TPS60111 Regulated 5-V 150-mA Low-Noise Charge Pump DC/DC Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Product Folder Order Now Technical Documents Tools & Software Support & Community TPS60151 SLVSA02B – SEPTEMBER 2009 – REVISED JANUARY 2019 TPS60151 5-V and 140-mA Charge Pump 1 Features •1 Input Voltage Range 2.7 V to 5.5 V • Fixed Output Voltage of 5 V • Maximum Output Current: 140 mA • 1.5-MHz Switching Frequency • Typical 90-μA Quiescent Current at No Load Condition (Skip Mode) • Output Reverse Current Protection • X2 Charge Pump • Hardware Enable and Disable Function • Built-in Soft Start • Built-in Undervoltage Lockout Protection • Thermal and Overcurrent Protection • 2-mm × 2-mm 6-Pin SON-Package with 0.