Datasheet4U Logo Datasheet4U.com

TPS60205 - Low Power DC/DC Converters

Download the TPS60205 datasheet PDF. This datasheet also covers the TPS60204 variant, as both devices belong to the same low power dc/dc converters family and are provided as variant models within a single manufacturer datasheet.

General Description

D Compact Converter Solution in UltraSmall 10-pin MSOP With Only Four External Capacitors Required D Evaluation Module Available (TPS60200EVM-145) applications D Replaces DC/DC Converters With Inductors in Battery Powered Applications Like: Two Battery Cells to 3.3-V Conversion

Key Features

  • D Regulated 3.3-V Output Voltage With up to 100-mA Output Current From a 1.8-V to 3.6-V Input Voltage D Less Than 5-mV(PP) Output Voltage Ripple Achieved With Push-Pull Topology D Integrated Low-Battery and Power-Good Detector D Switching Frequency Can Be Synchronized to External Clock Signal D Extends Battery Usage With up to 90% Efficiency and 35-µA Quiescent Supply Current D Easy-to-Design, Low Cost, Low EMI Power Supply Since No Inductors Are Used D 0.05-µA Shutdown Current, Battery is Isola.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (TPS60204-etcTI.pdf) that lists specifications for multiple related part numbers.

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TPS60204, TPS60205 REGULATED 3.3ĆV, 100ĆmA LOWĆRIPPLE CHARGE PUMP LOW POWER DC/DC CONVERTERS SLVS354A − FEBRUARY 2001 − REVISED SEPTEMBER 2001 features D Regulated 3.3-V Output Voltage With up to 100-mA Output Current From a 1.8-V to 3.6-V Input Voltage D Less Than 5-mV(PP) Output Voltage Ripple Achieved With Push-Pull Topology D Integrated Low-Battery and Power-Good Detector D Switching Frequency Can Be Synchronized to External Clock Signal D Extends Battery Usage With up to 90% Efficiency and 35-µA Quiescent Supply Current D Easy-to-Design, Low Cost, Low EMI Power Supply Since No Inductors Are Used D 0.