Datasheet4U Logo Datasheet4U.com

TPS650861 - Programmable Multirail PMU

Description

The TPS650861 device family is a single-chip power-management IC (PMIC) designed to be programmed for optimal output voltages and sequencing.

Features

  • 1.
  • Two Banks of One-Time Programmable Memory for Programming Default Voltages and Sequence.
  • Wide VIN Range From 5.6 V to 21 V.
  • Three Variable-Output Voltage Synchronous Step-Down Controllers With D-CAP2™ Topology.
  • Scalable Output Current Using External FETs With Selectable Current Limit.
  • I2C DVS Control From 0.41 V to 1.67 V in 10-mV Steps or 1 V to 3.575 V in 25-mV Steps or Fixed 5 V Output.
  • Three Variable-Output Voltage Synchronous StepDown.

📥 Download Datasheet

Datasheet preview – TPS650861

Datasheet Details

Part number TPS650861
Manufacturer Texas Instruments
File Size 2.65 MB
Description Programmable Multirail PMU
Datasheet download datasheet TPS650861 Datasheet
Additional preview pages of the TPS650861 datasheet.

📁 Similar Datasheet

  • TPS603A - Photo Transistor (Toshiba Semiconductor)
  • TPS604 - POWER SCHOTTKY RECTIFIER (STMicroelectronics)
  • TPS606 - TERMINAL OPTO-ELECTRONIC SWITCH (Toshiba Semiconductor)
  • TPS60LB - SWITCHING MODE 60W LOW COST BOX TYPE POWER SUPPLY (Total Power International)
  • TPS611 - Phototransistor (Toshiba)
  • TPS611F - Phototransistor (Toshiba)
  • TPS612 - PHOTO TRANSISTOR (Toshiba Semiconductor)
  • TPS613 - SILICON NPN TRANSISTOR (Toshiba)
  • TPS614 - PHOTO TRANSISTOR (Toshiba Semiconductor)
  • TPS615 - PHOTO TRANSISTOR (Toshiba Semiconductor)
Other Datasheets by Texas Instruments

Full PDF Text Transcription

Click to expand full text
Product Folder Order Now Technical Documents Tools & Software Support & Community TPS650861 SWCS142 – JULY 2018 TPS650861 Programmable Multirail PMU for Multicore Processors, FPGAs, and Systems 1 Device Overview 1.1 Features 1 • Two Banks of One-Time Programmable Memory for Programming Default Voltages and Sequence • Wide VIN Range From 5.6 V to 21 V • Three Variable-Output Voltage Synchronous Step-Down Controllers With D-CAP2™ Topology – Scalable Output Current Using External FETs With Selectable Current Limit – I2C DVS Control From 0.41 V to 1.67 V in 10-mV Steps or 1 V to 3.575 V in 25-mV Steps or Fixed 5 V Output • Three Variable-Output Voltage Synchronous StepDown Converters With DCS-Control Topology – VIN Range From 3 V to 5.
Published: |