Datasheet4U Logo Datasheet4U.com

TPS65631 - Dual-Output AMOLED Display Power Supply

General Description

The TPS65631 is designed to drive AMOLED (Active Matrix Organic Light Emitting Diode) displays requiring positive and negative supply rails.

The device integrates a boost converter for VPOS and an inverting buck boost converter for VNEG and is suitable for battery-operated products.

Key Features

  • 1 2.9-V to 4.5-V Input Voltage Range.
  • Fixed 4.6-V Positive Output Voltage.
  • 0.5% VPOS Accuracy from 25ºC to 85ºC.
  • Separate VPOS Output Sense Pin.
  • Negative Output Voltage Digitally Programmable from.
  • 1.4 V to.
  • 4.4 V (.
  • 4 V Default).
  • Output Currents up to 250 mA Supported.
  • Excellent Line Transient Regulation.
  • Short-Circuit Protection.
  • Thermal Shutdown.
  • Available in 3.00-mm × 3.00-mm, 12-.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TPS603A Photo Transistor Toshiba Semiconductor
TPS604 POWER SCHOTTKY RECTIFIER STMicroelectronics
TPS606 TERMINAL OPTO-ELECTRONIC SWITCH Toshiba Semiconductor
TPS60LB SWITCHING MODE 60W LOW COST BOX TYPE POWER SUPPLY Total Power International
TPS611 Phototransistor Toshiba

Other Datasheets by Texas Instruments

Part Number Description
TPS65631W Dual-Output AMOLED Display Power Supply
TPS65632 Triple-Output AMOLED Display Power Supply
TPS65642 LCD Bias
TPS65642A LCD Bias
TPS65000 2.25-MHz Step-Down Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Product Folder Sample & Buy Technical Documents Tools & Software Support & Community TPS65631 SLVSBK1E – SEPTEMBER 2012 – REVISED MAY 2014 TPS65631 Dual-Output AMOLED Display Power Supply 1 Features •1 2.9-V to 4.5-V Input Voltage Range • Fixed 4.6-V Positive Output Voltage • 0.5% VPOS Accuracy from 25ºC to 85ºC • Separate VPOS Output Sense Pin • Negative Output Voltage Digitally Programmable from –1.4 V to –4.4 V (–4 V Default) • Output Currents up to 250 mA Supported • Excellent Line Transient Regulation • Short-Circuit Protection • Thermal Shutdown • Available in 3.00-mm × 3.