Datasheet4U Logo Datasheet4U.com

TPS6755 - ADJUSTABLE INVERTING DC/DC CONVERTER

General Description

The TPS6755 is an adjustable inverting dc/dc converter capable of operating from inputs as low as 2.7 V.

The only external components required are an inductor, an output filter capacitor, an input filter capacitor, a reference filter capacitor, two resistors, and a Schottky rectifier.

Key Features

  • a 160-kHz current-mode pulse-width-modulation (PWM) controller with a p-channel MOSFET power switch. The gate drive uses the converter output to reduce the die area needed to realize the 0.4-Ω MOSFET. Soft start is accomplished with the addition of one small capacitor at SS. A 1.22-V reference is available for external loads up to 125 µA. The TPS6755 is attractive for board-level dc/dc conversion in computer peripherals and in battery-powered equipment requiring high efficiency and low supply cu.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TPS6755 ADJUSTABLE INVERTING DC/DC CONVERTER D 1-W Output (VCC ≥ 4.5 V) D 2.7-V to 9-V Input Operating Range D 78% Typical Efficiency D 160-kHz Fixed-Frequency Current-Mode PWM Controller D EN Input Inhibits Operation and Reduces Supply Current to 1 µA D Output Voltage Limited to  VO ≤ 12 V– VCC D Soft Start D 8-Pin SOIC and DIP Packages D – 40°C to 85°C Free-Air Temperature Range D Pin-for-Pin Compatible with MAX755 SLVS155A – NOVEMBER 1996 REVISED DECEMBER 1996 D OR P PACKAGE (TOP VIEW) EN 1 REF 2 SS 3 COMP 4 8 VCC 7 OUT 6 GND 5 FB description The TPS6755 is an adjustable inverting dc/dc converter capable of operating from inputs as low as 2.7 V.