TPS73101-EP Datasheet | Texas Instruments

FEATURES - 2 Controlled Baseline - One Assembly - Test Site - One Fabrication Site - Extended Temperature Performance of - 55°C to 125°C - Enhanced Diminishing Manufacturing Sources (DMS) Support - Enhanced Product-Change Notification - Qualification Pedigree (1) - Stable With No Output Capacitor or Any Value or Type of Capacitor - Input Voltage Range of 1.7 V to 5.5 V - Ultralow Dropout Voltage: 30 m V Typical - Excellent Load Transient Response- With or Without Optional Output Capacitor - New NMOS Topology Provides Low Reverse Leakage Current (1) ponent qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold pound life. Such qualification testing should not be viewed as justifying use of this ponent beyond specified performance and environmental limits. - Low Noise: 30 μVRMS Typ (10 k Hz to 100 k Hz) - 0.5% Initial Accuracy - 1% Overall Accuracy Over Line, Load, and Temperature - Less Than 1 μA Maximum IQ in Shutdown Mode - Thermal Shutdown and Specified Min/Max Current Limit Protection - Available in Multiple Output Voltage Versions - Fixed Outputs of 1.2 V to 5 V - Adjustable Outputs from 1.2 V to 5.5 V - Custom Outputs Available APPLICATIONS - Portable/Battery-Powered Equipment - Post-Regulation for Switching Supplies - Noise-Sensitive Circuitry such as VCOs - Point of Load Regulation for DSPs, FPGAs, ASICs, and Microprocessors DESCRIPTION /ORDERING INFORMATION The TPS731xx family of low-dropout (LDO) linear voltage regulators uses a new topology: an NMOS pass element in a voltage-follower configuration. This topology is stable using output capacitors with low ESR and even allows operation without a capacitor. It also provides high reverse blockage (low reverse current) and ground pin current that is...